Antec NSK 6580 User Manual

Other manuals for NSK 6580: User Manual

Summary of NSK 6580

  • Page 1

    New solution series nsk3480 user’s manual manuel de l’utilisateur anwenderhandbuch manuale per l’operatore manual del usuario পᡅ䂀ᯢ᳌.

  • Page 2: Disclaimer

    1 at antec, we continually refine and improve our products to ensure the highest quality. It’s possible that your new case will differ slightly from the descriptions in this manual. This isn’t a problem; it’s simply an improvement. As of the date of publication, all features, descriptions, and illus...

  • Page 3

    2 set up 1. Take the case out of the box. Remove the foam packing material and plastic bag. 2. Place the case upright with the power supply fan at the back facing you on a stable flat surface. 3. Remove the two thumbscrews fastening to the top cover of the case. Set these screws aside and keep them ...

  • Page 4

    3 note: the detachable 4-pin section cannot be used in place of a 4-pin +12v connector. 3. Connect the reset switch (labeled reset sw) to the motherboard at the rst connector. Polarity (positive and negative) does not matter for switches. 4. Power switch (labeled power sw) connects to the pwr connec...

  • Page 5

    4 pin assignment for front panel ieee 1394 connector connecting the audio ports (ac’97 and hda) there is an intel standard 10-pin ac’97 connector and an intel 10-pin hda (high definition audio) connector; you can connect either the ac’97 or the hda connector to your motherboard depending on the spec...

  • Page 6

    5 result in being unable to use the 4th pci slot depending on the length of the card used. Both hdd trays use soft silicone grommets to mount the hdd. 1. Remove the screw fastening the hdd tray to the case and slide the tray out of the case. 2. Mount the hard drive into the drive tray through the bo...

  • Page 7

    6 specifications size: 120 x 120 x 25.4 mm rated voltage: dc 12v operating voltage: 10.2v ~ 13.8v the front 92mm fans this case comes with two optional 92mm fan mounts in the front of the case. The front fan should be installed so that the air is blowing into the case from the front. We recommend us...

  • Page 8

    Antec, inc. 47900 fremont blvd. Fremont, ca 94538 usa tel: 510-770-1200 fax: 510-770-1288 antec europe b.V. Stuttgartstraat 12 3047 as rotterdam the netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 customer support: us & canada 1-800-22antec customersupport@antec.Com europe +31 (0) 10 4...