Overture ii user’s manual.
2 at antec, we continually refine and improve our products to ensure the highest quality. So it's possible that your new case may differ slightly from the descriptions in this manual. This isn't a problem; it's simply an improvement. As of the date of publication, all features, descriptions, and ill...
3 5. Screw the brass standoffs into the threaded holes that line up with your motherboard. Do not overtighten the standoffs. Some standoffs may be pre-installed for your convenience. 6. Place your motherboard on the brass standoffs. 7. Screw in your motherboard to the standoffs with the provided phi...
Connecting the ieee 1394 (firewire®, i.Link®) port you will find a single 10-pin connector on a cable attached to the front ieee 1394 connection. This is an intel standard connector, which is keyed so that it can't be accidentally reversed as long as it is connected to a proper intel standard mother...
5 6. Rear right speaker out pin: connect the ret-r connector to this pin. 7. Rear left speaker out pin: connect ret-l connector to this pin. Installing 3.5" devices there are two 3.5" external drive bays on the front bezel. The drive bays are right above the power supply, and are fastened by two scr...
Or low to a fan-control device may result in the fan not being able to start. The already lowered voltage from the fan control device will be further reduced by the tricool circuitry below 5v. Specifications: size: 92 x 92 x 25.4 mm rated voltage: dc 12v operating voltage: 10.2v ~ 13.8v the 75 mm x ...
7 overture ii - explorer description 1 2a 2b 3 6 7 8 9 10 11 12 13 14 15 16 17 18 5 4 19 no descriptions 1 top panel with ventilation 2a normal expansion slot cover 2b ventilated pci slot covers 3 internal 3.5" drive cage 4 power connector 5 92mm tricool fan 6 universal i/o panel 7 7530mm blower fan...
Antec, inc. 47900 fremont blvd. Fremont, ca 94538 tel: 510-770-1200 fax: 510-770-1288 antec europe b.V. Sydneystraat 33 3047 bp rotterdam the netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 technical support us & canada 1-800-22antec customersupport@antec.Com europe +31 (0) 10 462-2060...
