Antelope Orion32 HD Owner's Manual - 1. Safety Notes
5
1. Safety Notes
To reduce the risk of electrical shocks, fire, and related hazards:
•
Do not remove screws, cover, or cabinet. There are no user serviceable
parts inside. Refer servicing to qualified service personnel.
•
Do not expose this device to rain, moisture or spillover of liquid of any kind.
•
Should any form of liquid or a foreign object enter the device, do not use
it. Switch off the device and then unplug it from the power source. Do not
operate the device again until the foreign object is removed or the liquid
has completely dried and its residues fully cleaned up. If in doubt, please
consult the manufacturer.
•
Do not handle the power cables with wet hands!
•
Make sure the device is switched off when plugging/unplugging it to/from
the power source.
•
Avoid placing things on the cabinet or using the device in a narrow and
poorly ventilated place which could affect its operation or the operation of
other closely located components.
•
If anything goes wrong, turn off the device first and then unplug the power.
Do not attempt to repair the device yourself: consult authorized service
personnel or your dealer.
•
Do not install near any heat sources such as radiators, stoves, or other
apparatus (including amplifiers) that produce heat.
•
Do not use harsh chemicals to clean your Unit. Clean only with specialized
cleaners for electronics equipment.
•
Connect all your devices before powering your Unit.
•
This unit is connected via its power cord to the mains safety earth.
•
Never operate the unit without this earth connection.
•
AC power supply cable should be routed so that it is not likely to be walked
on or squeezed by items placed upon or against it.
•
To completely turn off the device, unplug the power cable first from the
outlet and then from the rear panel of the unit.
•
Both, occasional and continued exposure to high sound pressure levels can
cause permanent ear damage via headphones and monitors.
•
Your unit should always be un-racked when traveling or in a flight case.
•
The device is designed to operate in a temperate environment, with a
correct Operating Temperature of: 0-50 °C, 32-122 °F