Antelope Zodiac Gold Owner's Manual - 4. Quick Start
1
8
4. Quick Start
It only takes a few moments to harness the benefits of the Zodiac Sound.
Follow these simple steps to connect Zodiac Gold to your system setup:
1. Connect to the DC power source via rear panel connector (14).
2. Connect your choice of digital input(s) and analog outputs on the rear panel.
3. If you wish to use USB as the digital input, connect the Zodiac Gold USB cable to your
computer. The guest operating system will recognize the new output audio device (Zodiac
Gold). You should redirect sound from the computer to your newly indicated output – Zodiac
Gold.
Mac OS:
In your
Apple Menu, go to System Preferences and choose Sound, Select the Output tab
and select
Zodiac Gold from the list.
Windows:
Click on your PC’s START menu, then select:
CONTROL PANEL / SOUNDS & AUDIO DEVICES / AUDIO and ensure that the
Zodiac Gold
is selected as default audio device.
See more on
www.antelopeaudio.com – support area.
4. Adjust the main volume (5) and headphones volume (7) to minimum.
5. Turn the unit on with the power button (8).
6. Play audio from your preferred digital or analog source.
7. Using source button select desired rear panel input.
The sample rate of the input (digital inputs only) should be indicated in the status display
(6), the Lock indicator (1) should light steadily and audio should be present at the Zodiac
outputs.
8. If you want to control your Zodiac remotely from your computer, there is also a software
control panel available for you on for MAC, PC and Linux systems! You can download it
from our downloads page on the support section of our website.