Antelope Zodiac Gold Owner's Manual - page 9
1
10
8. Power button
Toggles standby/operation state.
9. Power/Standby light
Indicates operational and standby modes. Dimly lit for standby and brightly lit for operational power.
10. Source button
When the display shows the sample rate, pressing this button once, briefly changes the display to
show the currently selected input source (for one second).
When the display shows an input source, pressing this button once will switch to the next available
input source.
NOTE: Only inputs fed with valid signals appear as options. Example: If only signals on AES
and TOSLINK1 inputs are present, they will be the only options available when selecting the
source (together with analog input 2).
Hint: When the display shows the sample rate, you should push this button twice in order to
switch to the next available source input.
11. Mono button
Pressing the mono button activates the summed outputs to give mono on the analog and headphone
outputs. The status of the mono function is indicated by the mono light (4). The mono feature is only
available on digital sources.
12. Mute button
Press the button once for full mute. Press once again to restore normal volume.
Press the button and hold it for about one second to activate the -20dB attenuator. Press once to
restore normal volume.
The display (6) also changes brightness when using the mute options.
13. Headphone Outputs
Universal Stereo Headphone jacks for connecting headphones for a wide range of impedances.