Antenna Specialists Constellation On-Glass User Manual - page 3
3
Pre-Installation Considerations
•
Important: Professional installation is highly recommended due to the
complexity of electronic components within the vehicle.
•
Check parts list. If any shortages call Antenna Specialists Customer
Service 800-321-9977. (See Fig. 1, page 4)
•
Integrity of the installation will be compromised if one or more of the
following are present at the planned installation location.
1. Rain X™ or other commercial water repellant.
2. After market window tinting material.
If present, remove material or select a different location before
installing.
•
Do not install “On-Glass”
®
antenna on front windshield.
•
Antenna must have an unobstructed view of the roofline, including
clearance of roof racks, etc. (See Fig. 2, page 5)
•
Identify location of installation. Verify location using Template, Glass
Curvature Tool and instructions provided. Avoid locations with
extremely curved glass.
•
Receiver location cannot be more than 17 feet from antenna.
•
Check for cold weather install; the temperature must be at least 60°
F.
•
Record Serial No., Model No. and Manufacturer’s Code on back
cover (see Fig. 22, pg. 14 for data location)
•
Caution: Cable must NOT be cut or altered in any manner as
reception will be adversely affected.
Recommended Vehicle Mounting Locations
Caution: Verify sliding door & hatchback clearance
when mounting on side window pane or rear window.
Car
- rear window, hatchback.
Pickup Truck
- rear or side window
pane (must be fixed window pane).
SUV
- side rear fixed pane or rear
hatch.
Van
- rear window hatch or rear side
window.