Audemars Piguet royal oak offshore alinghi polaris Instructions For Use Manual - page 6
2. TECHNICAL DATA
2.1 Movement technical data
• 2326 / 2847 calibre
• Total thickness of the movement : 7.30 mm
• Total diameter of the movement : 25.60 mm (11 ½ lines)
• Fitting diameter : 26.00 mm
• Frequency : 28,800 vibrations/hour (4 Hz)
• Number of jewels : 50
• Power reserve at maximum winding : above 40 hours
• Unidirectional automatic winding (anticlockwise)
• 21-carat gold rotor, ball-bearing mounted
• “KIF Elastor” shock protection system for the balance
• Mobile stud support
• Inertia balance adjustable with 4 gold screws (Thread
Ø : 0.29 mm)
• Number of separate parts : 366
Case technical data
• Diameter : 42 mm
• Total height : 14.65 mm
• Case water-resistance : 10 bars (100 m)
View of the movement
View of the movement
(bridge side)
(dial side)
3. BASIC FUNCTIONS
3.1 Setting the watch time
Unscrew the crown and pull it out to position B. The hands can
then be easily wound forwards or backwards to set the time.
3.2 Stopping the balance when setting the time
The seconds hand is automatically stopped by pulling the winder
crown thereby enabling precise setting.
3.3 Rewinding the movement
If the watch stops, 10 revolutions of the crown (in position A)
are sufficient to start it again. It is then wound by the simple
movement of the watch on the wearer’s wrist.
NB :
Be sure to return the crown to position A and screw it
back in.