Audio Engineering Axium AX-400DA Instruction Manual - Specifications
22
Specifications
Amplifier Section
Rated Output Power (FTC)
All Channels:
50
Watts
/channel,
8Ω loads
THD (Total Harmonic Distortion)
0.1% (40Watt, 8Ω load)
Speaker Impedance (Z1 – Z4 L/R)
4Ω - 8Ω
Input Sensitivity and Impedance
(S1
–
S3
L/R)
0.72 V / 22KΩ (Unbalanced)
Coax digital input level and Impedance
0.5V ± 0.05V / 75Ω
Frequency
Response
20Hz – 20 KHz / – 3dB (8Ω)
Tone
Control
±12dB, 100 Hz (Bass)
±12dB, 10 KHz (Treble)
Signal to Noise Ratio
100dB (IHA-A, 1V input / unbalanced)
Interface
IR Output
Eight 3.5mm Jack: IR1 – IR6 and SUM IR1-IR6:
Current
limited
to
25mA
Expansion Bus
One Dual RJ45 Socket: Axium Bus, Summed IR
Ethernet
One Shielded RJ45 socket – 100Base T
RS232
One Isolated DB9 – 9600 Baud
USB
One USB mini-B 5 pin
Controller
Four RJ45 socket: PORT1 – PORT4
One 4 way terminal plug (0V, IR, 12V & Data)
Amp On & PG Control
One 8 way terminal plug with Amp ON1 – 4 and
Two Page preset contact closure inputs: PG1 & PG2.
General
Power Supply
110 – 240VAC 50/60 HZ
Power
Consumption
320 W
Standby Power Consumption
4W
Dimensions
435 х 90 х 390 mm
Height including feet
105mm
Weight
7Kg
Specifications and features are subject to change without notice.