Audio Pole CLIMAX 3200 DSP User Manual - page 9
Parameters and DSP Settings
9
4
Parameter setting
Pressing the « Mute/Edit » key for more than three seconds activates the edit mode.
Green display of the relevant channel lights up, and relevant channel turns into the parameter setting (channel
default setting is « input mute »).
Short press a function key (11) to activate the relevant parameter setting menu. Turn coder for parameter
setting, and short press the coder switch (5) or (6) to confirm the relevant parameter.
a) POLARITY
Settings :
•
0° [+]
•
180° [-]
b) DELAY
From 0 to 1000 ms:
•
21 µs steps between 0 and 10 ms,
•
84 µs steps between 10 et 20 ms,
•
0.5 ms beyond 20 ms.
c) LIMITER
Settings :
•
THRESH: -20 dBu ~ +20 dBu
•
ATTACK: 0,3 ms ~ 100 ms
•
RELEASE: x 2, x 4, x 6, x 8, x 16, x 32
(Multiple of Attack time)
d) X-OVER HPF & LPF
Settings :
•
High Pass range: 20 Hz ~ 20 kHz
•
Low Pass range: 20 Hz ~ 20 kHz
•
Filter type: Linkwitz Riley, Bessel, Butterworth
•
Slope: 12 dB, 18 dB, 24 dB, 48 dB
e) EQ
Settings (x 6 EQ1 ~ EQ6)
Parametric :
Frequency band: 20 Hz ~ 20 kHz
Gain: - 20 dB ~ + 20 dB
Bandwidth: 0.05 dB/Oct. ~ 3 dB/Oct.
Lo Shelf, Hi-Shelf:
Frequency band: 20 Hz ~ 20 kHz
Gain: - 20 dB ~ + 20 dB
Slope: + 6 dB, + 12 dB