Audio Pole PX-140 User Manual - Controls And Settings
Controls and Settings
Front panel
3
PX-140
PROFESSIONAL STEREO AMPLIFIER
Rear Panel
6 – Mains socket and fuse
Before any connections make sure that the power cable is not damaged. The connection to the mains supply
must have an earth connection. The mains voltage supplied must conform with the electrical characteristics of
the appliance. The fuse compartment is located above the power connector. In the event of failure, use a fuse
with the same electrical characteristics.
7 – POWER OUTPUTS
Speakon and ¼’ Jack output terminals.
8 – LIMITER
Limiter activation switch. It protects against distortion when input levels exceed a certain threshold.
9 – INPUT
Balanced XLR and ¼’ Jack input connectors.
10 – MODE
Stereo/Bridge mode selector (see paragraph 4).
5
PX-140
1 – POWER
Power supply switch.
2 – CLIP
Clip indicator. The Led flashes when the distortion ratio exceeds 0.5%. Reduce the input levels in such a case.
3 – LIMIT
Limiter activation indicator. The Led flashes as soon as the limiter is activated (see 8).
4 – POWER ON
Power indicators for channel 1 and channel 2.
5 – Volumes
Volumes knobs for channel 1 and 2.