Audio Pole PX-140 User Manual - Technical Specifications
8
Technical Specifications
6
4 Ω
2 x 70 W
8 Ω
2 x 50 W
Bridge Mode Power
8 Ω
140 W
Distortion
Frequency response
Damping factor @ 1kHz
S/N ratio, 20 Hz – 20 kHz
Gain (V)
Input sensitivity @ 4 Ω
Input clipping @ 4 Ω
Input impedance
Load protection
Power supply
Dimensions (L x H x D)
Net weight
Stereo Power
10 V rms (+22 dB)
20 Hz – 20 kHz ± 0,1/-3 dB
> 300 @ 8 Ω
102 dB
x 40 (32 dB)
1 V rms
10 kΩ unbalanced, 20 kΩ balanced
Controls
Front: ON/OFF sw itch, CH1 & CH2 gain knobs
Rear: limiter, bridge, selector
Indicators (1 per channel)
POWER ON : blue led
LIMIT: y ellow led
CLIP: red led
6.5 kg
Connectors, each channel
Input: activ e balanced XLR and 1/4" jack
Output: Speakon and 1/4" jack
ON/OFF muting, DC fault grounding relay , internal fault fuses
220 - 240 VAC 50 ~ 60 Hz
483 x 44 x 28 mm
Warranty
7
This device is warranted parts and labor against any manufacturing defects for a period of two years from the
date of purchase by the first user.
Conditions
1.
The unit has been installed and implemented by observing the safety instructions in this operating manual.
2.
The device was not diverted from its destination, either voluntary or accidental, and suffered no
deterioration or modification other than those described here or explicitly authorized by AUDIOPOLE.
3.
All modifications or repairs have been carried out by an authorized service station.
4.
The defective product must be returned with the dealer who made the sale or to an authorized service
station with proof of purchase.
5.
The device was properly packaged to avoid damage in transport.
22, rue Édouard Buffard, Z.A.C. de la Charbonnière, Montévrain - 77771 Marne-la-Vallée Cedex 4 - France
Tél : + 33 (0)1 60 54 32 00 - Fax : + 33 (0) 1 60 54 31 90 - www.audiopole-pa.fr