Audio Pole PX-360 User Manual - page 5
Manual is about: PROFESSIONAL POWER AMPLIFIER
of
10
5
3
Functions
FRONT PANEL
1 – POWER
Power switch.
2 – Volume
Volume control.
3 – POWER ON
Power indicator.
4 – SIG
Signal indicator.
5 – PROT
Protection indicator. If the amplifier fails, the Led lights up, the output being automatically muted. Check
the cable connection between the amplifier and the speaker. Also check that the vent grille is not
obstructed. If the amplifier is installed into a bay, there is a risk that the cooling is not sufficient and the
temperature can raise to the upper limit level where the protect mode is triggered.
6 – CLIP
Clipping indicator. The Led lights up as soon as the distortion rate exceeds 0.5%. The input level is too
high and it is necessary to decrease the volume or to switch the limiter on.
4