Audio Resource Group ARG-TX90MST Manual - page 3
900MHz Stationary Transmitter
It allows the user to transmit the audio wirelessly in a certain range. Connect the audio source to
the bal./unbal. Input on the back of the transmitter. Hook up the antenna to the front antenna
jack or rear antenna jack and match the antenna selection switch. You can monitor the audio via
the headphone jack in front of the panel. In unlock status, set the channel number by pressing
Channel UP or Channel DOWN buttons. And adjust the gain output by pressing Gain UP or Gain
DOWN buttons.
Lock/Unlock
Unlock the transmitter by pressing the LOCK button for a second and the lock icon disappears
from the display. Press it again to unlock.
Channel setting (1-25)
In unlock status, press the Channel + or Channel – button to scroll up or down the channel
numbers
Gain setting (1-7)
In unlock status, press the Gain + or Gain – button to adjust the gain
MUTE
Press the Gain + or Gain – button for a second to mute the transmitter and the signal strength
disappears. Press one of it again to unmute.
Monitoring
Plug in the headphone to the headphone output jack, turn the volume knob to adjust the
monitoring volume
Sampling Rate Switch
On OFF position, press and hold the Gain + and Gain - buttons and turn the transmitter to ON