B&G Zeus2 series Quick Start Manual

Other manuals for Zeus2 series: Installation Manual, Operator's Manual, Operator's Manual

Manual is about: multifunction displays

Page of 8

Download

Print this page

Bookmark us

Zeus

QuickStart Guide

Font panel

MARK

MARK

No. Description

Touch screen

Rotary knob. Rotate to scroll through menu items, then press to confirm a

selection. Rotate to adjust a value and to zoom a zoomable panel.

X key. Press once to exit a dialog, to return to previous menu level and to remove

the cursor from the panel.

Power key. Press once to display the System control dialog. Repeat short presses

to cycle the backlight brightness. Press and hold to turn the unit ON/OFF.

Home key. Press once to display the Home page. Repeat short presses to cycle

the favorite buttons. Press and hold to display all favorite buttons as an overlay

on active page. Repeat short presses to cycle the favorite buttons.

STBY / AUTO key. With the autopilot in any automatic mode: Press to set the

autopilot to Standby mode. With the autopilot in Standby mode: Press to display

the autopilot mode selection pop-up.

Card reader door

Micro-SD Card readers

MARK key. Press to instantly save a waypoint at the vessel’s position. Press and

hold to display the Plot menu used for saving new waypoints, routes and tracks.

Note:

The

MARK

key is not available on 7” units.

7” units

9” & 12” units

1 2 3 4 5 6 7 Next › »

Summary of Zeus2 series

Page 1
Zeus 2 quickstart guide font panel mark mark 7 8 5 6 2 4 3 2 4 3 9 7 1 5 6 7 1 no. Description 1 touch screen 2 rotary knob. Rotate to scroll through menu items, then press to confirm a selection. Rotate to adjust a value and to zoom a zoomable panel. 3 x key. Press once to exit a dialog, to return ...
Page 2: The System Control Dialog
The system control dialog used for quick access to system settings. Activate the dialog by: • pressing the power key, or by • swiping from the top of the screen ¼ note: the content of the system control dialog depends on connected equipment and active panel. The home page activate the home page by p...
Page 3: Application Pages
Application pages activate an application page by: • tapping the application button (full page panel), by • tapping a favorites button, or by • pressing and holding an application button to select a predefined split page. 3 2 1 1 2 3 status panel application panel instrument bar adjust panel size yo...
Page 4: Edit A Favorite Page
Edit a favorite page enter the favorites edit mode by: • tapping the edit icon, or by • pressing and holding a favorite button edit favorite page delete favorite page add new favorite page edit an existing favorite page or configure a new page by dragging panel icons into or out from the preview are...
Page 5: Charts
Charts a • zoom the chart by using spread or pinch gestures, by using the zoom buttons ( a ), or by turning the rotary knob. • move the view in any direction by panning the chart. • display information about a chart item by tapping the item. Waypoints save a waypoint at the vessel’s position by: • u...
Page 6: Sailsteer Panel
Sailsteer panel sailsteer provides a composite view of key sailing data. All data is displayed relative to the yacht’s bow. The number of data fields included in the panel is dependant on available panel size. Laylines on chart and sailsteer panels windplot panel wind direction and wind speed. Timep...
Page 7: Autopilot
Autopilot you can activate the autopilot from any panel. 1. Press the stby/auto key or the autopilot tile in the instrument bar 2. Select the autopilot mode in the autopilot pop-up s standby autopilot is passive. Used when manually steering at the helm fu follow-up manual steering. The rudder angle ...
Page 8: Radar
*988-10629-001* radar a b • turn the radar transmitting on/off from the menu. • set the range by using the zoom icons ( a ) or by turning the rotary knob. • adjust gain, sea clutter and rain clutter settings from the slide bar, displayed by tapping the settings icons ( b ), or by pressing the rotary...