B&K AVP3090 Owner's Manual - page 26

Page 24

.

Press ENTER, the display shows:

You can toggle between OFF, ON, AC-3 and DTS modes by pressing 

x

 or 

y

.

This holds true for the CD, V1, V2, TV, and TNR digital settings.

Digital off-

Selects the corresponding AUDIO L/R analog input for  Pro Logic

Surround Processing.

Digital on- 

Selects the corresponding digital input for PCM Pro Logic Surround

Processing.  If Dolby Digital is detected, Dolby Digital surround

processing is automatically used.

Digital AC-3- Selects the corresponding digital input for Dolby Digital Surround

Processing.  PCM signals are not processed in this mode.

Digital DTS- Selects the corresponding digital input for DTS 5.1 Surround

Processing.  No other signals are processed in this mode.

Press ENTER, the display shows:

Press ENTER:

Press ENTER:

Press ENTER:

Press ENTER:

Press ENTER, the display shows:

You can increase to +6.0 dB by pressing the 

x

, or decrease to -6.0 dB by

pressing 

y

. This holds true for the CD, V1, V2, TV-V3, TUNER, and TAPE level

settings.The level controls are for matching the input levels of all your sources

coming into the preamplifier.