B.K.I. Inc RGT-3001 Owner's Installation And Operation Manual - Royal Guardian,
Blaze King
,
Royal Guardian,
Model RGT-3001
OWNER'S INSTALLATION AND OPERATION MANUAL
Page
Page
Page
Page 33
33
33
33
Date Printed: Tuesday, February 08, 2005
OM
OM
OM
OM----RGT
RGT
RGT
RGT.PUB
.PUB
.PUB
.PUB
Revision Date: 11/10/2004
LISTED SOLID FUEL ROOM HEATER
P/N 0194BB
Also suitable for use in MOBILE HOME
MODEL: RGT 3001
Tested to: UL 1482/ULC S627 WH-
Report NO: 632-000500 (1/90)
PREVENT HOUSE FIRES. Install and use only in accordance with
manufacturer’s installation and operating instructions. Contact local building or
fire officials about restrictions and installation inspection in your area.
Use 6”/152mm minimum 24 GA. black or blued steel chimney connector with a
listed factory-built chimney suitable for use with solid woods, or an approved, lined
masonry chimney. Refer to local building codes and manufacturer’s instructions for
precautions required when passing a chimney or connector through a combustible
wall or ceiling. DO NOT CONNECT THIS UNIT TO A CHIMNEY SERVING
ANOTHER APPLIANCE.
MINIMUM CLEARANCES TO COMBUSTIBLE CONSTRUCTION (in./mm)
CONVENTIONAL- REDUCED CLEARANCE
USING SINGLE USING DOUBLE
WALL CONNECTOR WALL CONNECTOR
A. Connector to Backwall 16”/406mm 12”/305mm
B. Connector to Sidewall 25.5”/648mm 21.5”/546mm
C. Connector to Adjacent Wall 21.5”/546mm 17.5”/445mm
D. Unit to Backwall 10”/254mm 6”/152mm
E. Unit to Sidewall 16”/406mm 12”/305mm
F. Corner to Adjacent Wall 12”/305mm 8”/204mm
For additional clearances, please refer to owner’s manual.
COMBUSTIBLE FLOOR REQUIRES use of a minimum 3/8”/9.5mm non-combustible floor
protector extending a minimum of 18”/406mm to the front and 8”/203mm to each side of the fuel
loading and/or ash drawer, and 2”/51mm to either side of the chimney connector.
ALCOVE INSTALLATIONS: Minimum ceiling height 64”/1626mm, minimum width 59”/1499mm,
maximum depth 30”/762mm. Listed double wall chimney connector required. Requires use of Side
Heat Shield Part No. 8301AA and Rear Heat Shield No. 8302AA.
MOBILE HOME INSTALLATIONS: Roof exit required. DO NOT INSTALL IN A SLEEPING
ROOM. The structural integrity of the mobile home must be maintained.
COMPONENTS REQUIRED FOR MOBILE HOME INSTALLATION
Outside Air Kit No. Z8300AA - Side Heat Shield No. Z8301AA - Rear Heat Shield No. Z8310AA
One of the following listed chimney connectors (with compatible listed chimney system)
In the U.S.A : Duravent Dura Plus HT/Ameri-Tec HS/Metalbestos HT/Security 103 HT
In Canada: Canadian stoves require high temperature pipe meeting S629M requirements and
listed double wall pipe.
Replace glass only with ceramic glass available from your Blaze King Dealer.
Operate with doors closed only.
Electrical rating: 115 V, 0.58 Amps, 60 Hz. Route power cord away from appliance.
Risk of electrical shock. Disconnect power before servicing.
For use with solid wood fuel only. Do not use grate or elevate fire. Build fire directly on hearth.
Manufactured by: Blaze King Industries
Valley Comfort Systems
400 W. Whitman Dr. 1290 Commercial Way
College Place, WA. Penticton, B.C.
99362 USA V2A 3H5
Design and specifications subject to change without notice. Covered by one or more of the
following U.S. Patents
D249890, D250541, D263993, D270087, 4261324. In Canada, patents 45026 and 45247.
Other U.S. and Canadian patents pending.
DO NOT REMOVE OR COVER THIS LABEL
U.S. ENVIRONMENTAL PROTECTION AGENCY
Certified to comply with July 1990 particulate emission standard
DATE OF MANUFACTURE
1999
2000
2001
2002
2003
2004
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEPT
OCT
NOV
DEC
ADJACENT WALL
FLOOR PROTECTOR
FRONT
4”
4”
STOVE
18”
C
F
F
A
D
J
A
C
E
N
T
W
A
L
L
STOVE
E
B
A
D
BACK WALL
S
ID
E
W
A
L
L