B-mMla PSA Operation Manual - Installation Guide
4
INSTALLATION GUIDE
Using the appliance for the first time:
1.
Read the instruction manual and retain for future reference.
2.
Remove all packaging, use a soft dry cloth to clean all the removable parts, the product cavity, and then re-
assemble parts.
3.
Position the appliance on a dry, solid, level surface and ensure the appliance is provided with reasonable
space of at least 10 cm to operate effectively.
4.
Check power sockets and any extension cords to confirm compliance with product requirements. Ensure
that the appliance is plugged in prior to use.
5.
The appliance is equipped with sensors for detecting filter assembly’s position. The appliance will not
operate with if filter assembly is not properly placed.
6.
When the appliance is turned on for the first time, warm air may be released from the air outlet. This is
normal due to catalytic oxidation taking place inside the NCCO Reactor.
1.
Open the top cover
Lift up and remove top cover.
2.
Detach filter assembly
Pull out filter assembly from main body.
3.
Remove plastic packaging materials of filters
Remove all packaging materials before using the appliance.
4.
Fit the Filter assembly to original position
Fit the Filter assembly back to the appliance and finally mount the top cover.
Attention:
Please make sure the filter assembly is fitted in right direction, the arrows
should be matched.