B-mMla PSA Operation Manual - page 7
6
FILTER CARE AND REPLACEMENT
1.
Filter lifetime may vary depending on the environment, usage and location of the appliance.
2.
To maintain optimal performance of the appliance, only use the recommended filters.
3.
Always disconnect appliance from the power supply prior to disassembly.
4.
When the NCCO Reactor needs to be replaced, it is recommended that the HEPA Filter be replaced at the
same time.
Suggested Filter Cleaning and Replacement Cycles
Filter
Cycle
Method
HEPA Filter
Every 6 months
*
Replacement
NCCO Reactor
Every 2 years
*
Replacement
*The suggested filter cleaning and replacement cycle may differ depending on the operating environment.
1.
Open the top cover
Lift up and remove top cover.
2.
Change HEPA Filter or NCCO Reactor
Take out the filter assembly from the
appliance, and take out the HEPA Filter by
pulling the belt from filter assembly.
Replace the new HEPA Filter or NCCO
Reactor. Fit the Filter assembly back to
the appliance.
Tips:
When the NCCO Reactor is needed to be
replaced, HEPA Filter is recommended to
be changed at the same time.
3.
Mount the top cover
Make sure the front cover is firmly locked.