B&R Industries REVERSE OSMOSIS Owner's manual - page 11
“My R.O. is constantly running.”
1. Check tank pressure and check valve.
“I’ve noticed poor taste/odors in the product
water.”
1. Increase in product TDS.
2. Postfilter expended.
3. Tank/system contaminated.
4. Tank diaphragm out of place.
5. Postfilter cartridge not completely flushed
“The product water is cloudy.”
1. Dissolved air from feed water that has
concentrated in the product water.
“My ice cubes are cloudy.”
1. Increase in product water Total Dissolved
Solids.
2. Some shapes of ice cubes can trap more
dissolved air. Large square cubes are generally
clearer than small round cubes.
Tank pressure should be 10 psi empty.
Flush tank completely. See “I have too much Total
Dissolved Solids (TDS) in the product water.”
Replace postfilter cartridge.
Replace prefilter and postfilter and sterilize tank
and system.
Replace tank and postfilter cartridge.
Flush two tanks of RO water through system.
Let the water stand until dissolved water dissipates.
It usually clears up as the condition of the feed
water changes. Call your local dealer for continued
problems.
Flush tank and see “I have too much Total
Dissolved Solids (TDS) in the product water.”
Try using a different ice cube mold. Try switching
ice cube maker from automatic to manual. Let the
water stand until dissolved water dissipates, then
allow to freeze. See “The product water is cloudy.”
11