B2 Audio M 12 Owner's Manual - page 2
1. FEATURES
2. DESIGN FEATURES
Speaker short circuitry, DC offset, Voltage sensor & thermal protection.
switching devices.
The
B2
line up are made to fullfil our philosophy for amplifiers; A variety of applications, highest
possible efficiency and great appearance.
The
B2
amplifiers are designed to produce high power levels even from stock electrical systems.
High efficiency is created from updating every stage through the amplifiers' circuit. High speed
controller chipsets, efficient power devices, precise thermal management and the best engineering
Thank you for purchasing the
B2
M12
amplifier for your car audio system.
B2
has through years of dedication introduced our line of competition amplifiers.
are the cornerstones of the
B2
amplifier series.
Low Level Input and Output
~350 Hz
Input level 0.2V ~6V
Variable subsonic filter : 10Hz ~ 50Hz at 24dB/ Oct
Variable low pass filter : 35Hz ~ 250Hz at 24dB / Oct
Variable bass boost : 0 ~ 9 dB at 45 Hz
Remote gain controller
Fuse rating : 800 Amps
Working battery voltage : 9V ~ 18V
Minimum Impedance :
M12
2ch mode: 1 ohm.
M12
bridged mode: 2 ohm.
Dimensions ( L x W x H ) : 650 mm x 258 mm x 132 mm
All features are subject to change in the continuing effort to improve the product without notice
9840 WRMS
2 x 4920 WRMS
(14,4V,
11700 WRMS
2 x 5850 WRMS
(16,0V,
15000 WRMS
(12,0V,
FEATURES
Frequency response: 20 Hz
B2
M
12
output power
2)
B2
amplifiers offer an advanced protection circuit for the benefit of the user.
3) The
B2
pcb has been designed using a double sided board and features high current mosfet
4)
M12
has a 24 dB slope/Oct low pass & subsonic filter.
5)
M12
offers a wired remote level control which allows easy gain adjustment from
the drivers seat. In addition the
Better Bass Remote
can also be used for optimum adjustment.
2
M12
2 x 7500 WRMS
(18,0V,
1)
M12
will allow stable operation in 2ch mode @ 4/2/1 ohm impedance.
M12
will allow stable operation as a single unit @ impedances down to 2 ohm.
1 ohm stable 2 channel Ultra Class D Mono amplifier
POWER @ 2 OHM POWER @1OHM
, NB: 2ch mode only!
6700 WRMS
2 x 3350 WRMS