B2 Audio Quota MKII Owner's Manual - page 4
2. Panel layout
Quota
INPUT
Signal input from the head unit. A minimum level
input of 0.2V is essential for correct operation.
POWER & PROTECTION INDICATOR
Power LED, Blue-lit shows correct operation.
Protect LED, Red-lit shows general malfunction,
faulty connection or thermal protection.
GAIN (6V~0.2V)
Matching of the output voltage from the head unit’s
RCA line-outs to the input section.
SUBSONIC FILTER (10Hz~60Hz @ 12dB/Oct)
Adjusts the cut off point to for the subsonic filter
within the crossover’s range.
BASS BOOST
Variable bass boost with 0~12dB @ 45Hz.
PHASE SHIFT
Adjustable phase correction with 0~180
REMOTE LEVEL CONTROL PORT
Connection of external level control.
(The
Better Bass Remote
can be connected for additional features).
4
LOW PASS FILTER
Adjusts the cut off point for the low pass filter
within the crossover’s range.
Power connetors
Quota
REM (REMOTE)
Connect to switched +12V from the head unit.
SPEAKER OUTPUTS
Amplifier connection to the loudspeaker.
Minimum speaker cable is 12 gauge.
Minimum impedance for the
Quota
is 1 .
GND (GROUND CONNECTION)
For connection to the chassis’ ground.
For optimum performance 4 gauge cable is
recommended.
+12V (POWER CONNECTION)
For connection to the positive terminal of the
battery (+12). For optimum performance
4 gauge cable is recommended.
PROTECT
POWER
60Hz
10Hz
MAX
MIN
CH2
GAIN
SUBSONIC
LPF
300Hz
30Hz
BASS BOOST
12dB
0dB
REMOTE
CH1
INPUT
PHASE SHIFT
180
0
POWER
B+
REM
GND
SPEAKER
SPK A
SPK B
o