Baaske e-medic Manual - Choice of Location
5
Adherence to physical limit values
In accordance with the technical data maintain the specified permissible operating values
for temperature, humidity and air pressure without fail as the Pro-Line II PC would other-
wise be run outside its specifications and safe operation can no longer be guaranteed. If
the limits of the values for operation exceed or are below those stated the unit must be
immediately switched off and the mains supply plug removed.
Temperature fluctuation and condensation
If the unit is exposed to large temperature fluctuations, such as those that can occur
through transportation or storage in an unheated location, under no circumstances con-
nect the unit straight away as condensation moisture can accumulate internally. Wipe off
visible external condensation with a clean, antistatic cloth and in such a case leave it stan-
ding without packaging material for at least 2 hours before connecting the Pro-Line II PC
to the mains supply. The unit can only be connected when no further condensation forms.
Choice of location
The Pro-Line II PC must be placed in a dust free, vibration-free and dry location and must
not come into direct contact with liquids and combustible gases. Ensure that the computer
has a firm, horizontal and level platform. Make sure that the computer has enough room on
each side to prevent the build up of heat. Under no circumstances must the rear ventilation
grill be covered or blocked as the power supply unit will no longer be sufficiently cooled. If
other installation options are chosen it is to be ensured that nobody can be injured due to
inadequate fixation of the computer.