Baby Brezza Formula Pro Instructions For Setup

Summary of Formula Pro

  • Page 1

    Babybrezza.Com instructions formula pro ® for set-up, use and cleaning measuring wheel setting selection find your formula type below and set the measuring wheel to the corresponding number. If you do not see your formula brand or type on this list, check babybrezza.Com for updates or contact custom...

  • Page 2: Formula Pro

    Power cord control panel axle powder container lid powder container water tank lid funnel funnel cover funnel compartment base water tank bottle grate drip tray stirring wheel locking cover upper measuring wheel lower measuring wheel formula pro® controls & indicator lights no water warning led funn...

  • Page 3

    Example : assembled measuring wheel set to #5 example : assembled measuring wheel set to #5 powder container set up clean internal parts - before first use - without powder wash: funnel, funnel cover, inside of water tank, and all powder container parts (see page 2). 3 4 after washing, make sure all...

  • Page 4

    Adjust the drip tray so the bottle is as close to the funnel outlet as possible. This will make sure no formula spills outside of the bottle. Lift up and pull out to remove. Push in and down to install. Tall bottle short bottle bottle preparation continued after baby stops feeding from bottle, disca...

  • Page 5

    User tips daily cleaning monthly cleaning the funnel, funnel cover and underside of powder container must be cleaned once per day (if machine is used daily). Follow these steps to clean the formula pro® parts every day. Remove funnel & funnel cover by pulling out and down. Wipe the hole the on under...

  • Page 6

    Limited 1-year warranty the limited warranty is valid only on products bought through authorized resellers and used in the united states and canada. Buying through an unauthorized reseller or using this product outside of the united states and canada automatically voids this warranty. This warranty ...