Baby Brezza Formula Pro Instructions For Setup - page 3
Example :
Assembled
Measuring Wheel
set to #5
Example :
Assembled
Measuring Wheel
set to #5
Powder Container set up
Clean internal parts - before first use - without powder
Wash: Funnel, Funnel Cover, Inside of Water Tank, and all Powder Container parts (see page 2).
3
4
After washing,
make sure all Powder Container parts are COMPLETELY DRY before assembly.
Locking Cover should look
like this when inserted properly.
Place 10 ounce or larger container
to catch water.
Turn Powder Container Lid
Clockwise to lock into place.
Your Formula Pro® is now ready to use with powder.
Fill water tank to MAX line with
distilled water.
Select Measuring Wheel
setting 1 - 10 by using the chart
on the back cover of this booklet.
Place Powder Container Lid
on Powder Container as shown.
Make sure tab is in the back
Press upper & lower halves of Measuring Wheel together so your powder’s setting number shows through
window on the Upper Measuring Wheel. You have now assembled your Measuring Wheel.
Always use a clean and sterilized bottle, nipple or other feeding equipment.
Wash and dry hands before handling sterilized bottles.
Make each bottle as needed, and do not store mixed formula for later use.
Don’t add powder yet.
Follow the steps on the next
page to run an internal
cleaning cycle BEFORE using
the Formula Pro® with
powder.
Plug in machine and turn
power switch to on position.
Choose 10 oz. size by
pressing ounce button
4 times.
Press start to begin rinsing.
The Formula Pro® will stop after
dispensing 10oz of water.
Dispose of the water captured in
the container.
1. Place the front edge of Locking
Cover under the tab in the
Powder Container.
1
1
2
6
4
5
3
3
5
4
2
2a
Set up the Measuring Wheel to work with your powder type.
After setting up the powder container, run a cleaning cycle to rinse internal parts.
Set up the Powder Container and parts.
Place Powder Container on Base
with “MIN” & “MAX” lines facing front.
Place assembled Measuring Wheel
In Powder Container.
1
2
2. Press down on back edge
to lock in place.
Place Stirring Wheel In Powder
Container, align with axle and
push down so it touches the
Locking Cover.
5a
6
Numbers on
Lower Measuring Wheel
Numbers on
Lower Measuring Wheel
Don’t add
powder
Don’t add
powder
Follow the steps on pages 5 and 6 to prepare bottle with the Formula Pro®