Read these instructions carefully before use and keep them for future reference. Your child’s safety may be affected if you do not follow these instructions. This product complies with astm f833-07a www.Babyjogger.Com city elite assembly instructions.
2 • this stroller is not suitable for running, jogging, skating or rollerblading. • prevent serious injury to your child by always using the safety harness. • parcels or accessory items, or both, placed on the unit may cause the unit to become unstable. • never leave child unattended. • recommended ...
1 1 unpack stroller from box and set wheels aside. 2 begin to unfold stroller by pulling the auto-lock lever while pushing the handle up and away from the lower frame. The stroller will click into place. 3 turn stroller upright. 4 snap red safety strap to frame under the fold mechanism before use. F...
2 swivel/straight feature turn to the left to lock front wheel. Turn to the right for swivel action. Note: when loading and unloading child, lock the front wheel straight. Front wheel 1 lay stroller on its back so the handle is resting on the floor. 2 align the round opening on the top of the front ...
3 1 align wheel axle with wheel mount on stroller frame. 2 insert the wheel axle into the wheel mount until it clicks into place. Gently tug on wheel to make sure the rear wheel is properly attached. Repeat on other side. Rear wheels to install rear wheels: to remove rear wheels: 3 press the wheel r...
4 1 to attach canopy to frame, simply slide canopy peg into top hole of mounting bracket on the stroller frame, until you hear it click into place. (the bottom hole can be used to attach baby jogger accessories to your stroller). 2 at the top and on the side of the canopy, snap webbing together arou...
5 to engage parking brake: gently pull brake lever into upright position until it clicks into place. To release parking brake: pinch gray tabs and pull towards you. Push brake lever down until it is parallel with the frame. Brake warning: engage parking device before loading and unloading passenger..
6 safety harness 1 unclip top of shoulder strap from the seat and re-clip on the pair of seat loops closest to child’s shoulder height. 1 pull shoulder pads down close to main harness buckle to expose the plastic guide. 2 hold the plastic guide and pull the strap end to tighten or pull the upper har...
7 1 to use the raised kicker, pull up on seat flap above the footplate, and remove the kicker stand from storage pocket. Attach the kicker stand to the seat with the hooks provided under seat flap. 2 attach kicker stand by wrapping both sides of the webbing under the footplate. Thread one side of th...
8 1 to recline: pinch the clamp behind the seat, and slide it down to desired recline. Pull seat down on both sides to match recline position of clamp. Reverse to return to the upright position. • weather cover: if desired, pull weather cover down and over the seat back mesh. Secure firmly over both...
9 seat removing the seat: 1 remove the canopy. 2 starting with the top snap closest to the handle and working your way down the entire frame, unsnap seat from frame. 3 unfasten seat straps from around the bottom of the frame, located behind the front wheel. 4 loosen fold strap rings and unhook from ...
10 1 remove child from seat. Unsnap red safety straps from frame. Pull upwards on the "pull to fold" strap with a gentle tug and your stroller will fold in half. Simple lift & fold (patented) quick fold technology.
To preserve the longevity of your stroller, it is important to perform simple, regular maintenance. From time to time, make sure that the joints and folding areas are still in good condition. If you hear any squeaking or feel tension, you can take your stroller to a local bike shop for added lubrica...
12 available accessories car seat adaptor chicco car seat and multi-model versions are available. Child tray features cup holder and easy to clean surface. Child tray for double requires use of belly bar. Grow anywhere™ a plush stroller companion that starts as a stroller bunting but expands to a fo...
13 baby jogger's limited lifetime warranty: baby jogger warrants that the frame is free of manufacturer defects for the lifetime of the product. Manufacturer’s defects include but are not limited to the breaking of welds and frame tube damage. Textile or soft side materials and all other components ...
Baby jogger is a division of dynamic brands 8575 magellan parkway, suite 1000 • richmond, va 23227 t: 800.241.1848 • f: 804.262.6277 • www.Babyjogger.Com.
