Baby Jogger CITY SELECT Assembly Instructions Manual - page 5
6
7
Warning:
always remove
child from seat
before removing
seat from frame.
Seat
1
To assemble seat: Secure seat fabric to
seat frame by lining up snap placement
on the frame and fabric.
2
Secure seat straps around the bottom of the
frame, behind the front wheel. Thread one seat
strap through the D ring of the other strap, and
fasten both Velcro sides firmly together.
To assemble seat:
1
Remove mounting
bracket plugs by gently
pulling on them.
To place seat on frame:
2
Locate desired seat position
on stroller frame. Align seat
adaptor brackets with mounting
brackets on stroller frame.
3
Slide seat into brackets until it clicks
into place. Ensure both sides of seat
are securely fastened into frame
before use.
To remove seat:
1
Press gray tabs on
Adaptor Brackets and
pull up.
Adjustable Footwell
1
Squeeze lever located under the top of the seat,
behind the canopy.
1
To lengthen or shorten footwell: Press
buttons on lower portion of footwell and
slide in or out until it clicks into place.
2
Pull down to lower seat and pull
up to raise seat until it clicks into
the desired position.
2
To raise or lower footwell: Press buttons on
upper portion of footwell and pull up or push
down until it clicks into the desired positon.
Reclining Seat