Read these instructions carefully before use and keep them for future reference. Your child’s safety may be affected if you do not follow these instructions. Assembly instructions performance single the ultimate high performance jogging stroller this product complies with bs en 1888:2003+a1-3 this p...
2 1 • to assemble, simply unfold frame and insert the front of handle assembly into front tube connector and lock together, securing with snap locks. Frame front tube connector snap locks for the sake of your precious cargo, please read these warnings before using your baby jogger. • warning: parcel...
2 3 1 insert the footplate tab into the footplate holder slot. Footplate 3 using a phillips head screwdriver, attach footplate to stroller frame with screw supplied (you will find the screw in the bag with the instructions). 2 snap down onto stroller frame. 1 to install front wheel, lay stroller bac...
4 5 • to install, gently slide the wheel’s axle into the hole in the axle end until you hear it click into place. • to remove, simply push in the spring lock while pulling out the wheel. • your stroller may have a push tab instead of the spring lock, the above steps will also work for strollers with...
6 7 1 unclip top of shoulder strap from the seat and re-clip on the pair of seat loops closest to child’s shoulder height. 2 to adjust the strap length: remove the shoulder pads and move the plastic guide up or down to lengthen or shorten. 4 to adjust side straps: press side buckle latch and slide s...
8 9 1 to attach bracket to frame: unsnap seat from frame to reveal mounting location. Use a phillips head screwdriver to attach bracket screws to frame. 1 secure canopy straps around stroller frame. 2 to use your canopy simply pull forward to the desired position. 2 to attach canopy to bracket: inse...
10 11 folding 1 release the snap locks on both sides while holding on to footplate. 2 push handle frame back until handle foam grip rests on the ground, then pull the stroller axle upwards and fold as shown. Note: it is not necessary to remove the footplate to fold stroller. Front tube connector sna...
12 washing • you can machine wash your stroller’s seat in cold water with a mild detergent. To minimize shrinkage, simply reattach the seat to the frame to dry. (please do not put the seat in the dryer!) • be sure to remove the frame from the back of the seat before washing. • you may clean the stro...
Thank you! We wish you many happy journeys with your new stroller! Your stroller is a great product, and we are proud to manufacture it. If you have any questions or comments, please call your nearest reseller. Baby jogger is a division of dynamic brands 8575 magellan parkway, suite 1000 • richmond,...
