Important, keep for future reference assembly instructions the ultimate high performance jogging stroller performance single performance single (assem) 12/14/04 10:57 am page 1.
2 1 • to assemble, simply unfold frame and insert the front of handle assembly into front tube connector and lock together, securing with snap locks. Frame front tube connector snap locks • important, keep this booklet for future reference. • accessories which are not approved by the manufacturer or...
2 3 1 insert the footplate tab into the footplate holder slot footplate 3 using a phillips head screwdriver, attach footplate to jogger frame. You will need to rest the jogger handle on the floor in order to get to the bottom of the footplate. 2 snap down onto jogger frame. 1 to install front wheel,...
4 5 • to install, gently slide the wheel’s axle into the hole in the axle end until you hear it click into place. • to remove, simply push in the spring lock while pulling out the wheel. Rear wheels • simply adjust seat straps to desired degree of recline. • pull on strap when you want to return the...
6 7 adjusting safety harness: • loosen the shoulder straps from their plastic guides. • slide the end of each strap through pair of seat loops closest to your child’s shoulder. Safety harness • slide the end of the shoulder strap back into plastic guide. Please note: if you feel the straps are too t...
1 using a phillips head screwdriver, screw brackets to jogger frame. 2 fasten upper velcro straps canopy image shown with seat fabric removed for clearer viewing. 3 snap to jogger frame. 8 9 adjusting the brake • if you don’t have good braking action, simply squeeze the brake handle five or six time...
10 11 2 fasten the two bottom velcro straps. One is located near the front of seat and the other is near the footplate. Seat 1 snap eight frame snaps to frame. • snap rear basket straps around frame. • fasten front velcro strap. Basket • basket installation or removal requires releasing the bottom s...
12 13 washing • you can machine wash your stroller’s seat in cold water with a mild detergent. To minimize shrinkage, simply reattach the seat to the frame to dry. (please do not put the seat in the dryer!) • be sure to remove the board from the back of the seat before washing. • you may clean the s...
We wish you many happy journeys with your new baby jogger! Your stroller is a great product, and we are proud to manufacture it. If you have any questions or comments, please give us a call at. Bjc p/s 08.10.04 (r1–12/04) 1.800.241.1848 baby jogger is a division of dynamic brands 2042 westmoreland s...