Baby Lock Amelia BL100A Instruction And Reference Manual - page 17
Other manuals for Amelia BL100A:
Getting To Know Manual
Manual is about: A-Line Series
of
42
1. Raise presser foot lever.
2. Press the needle up/down button or rotate the handwheel toward you to raise the
needle into the up position.
3. Place a spool of thread onto the spool pin and secure with the proper size spool
cap.(see page 11)
4. Pass the thread around upper thread guide for upper threading.
5. Bring thread forward down the right channel, then to the left and up the left
channel.
6. Pull the thread through and into the take-up lever from right to left.
7. Pass the thread down the left channel and into the lower thread guide. Slide
the thread from right to left into the thread guide on the needle clamp.
8. Thread the needle from front to back or follow directions for using the needle
threader.(see page 14)