Baby Lock BNT10 Instructions - page 5
Copyright
2004-2013 Baby Lock USA
Customer Support: 1-800-313-4110
BMP9 Ver. 4.21 Software Update
– p.5
2. Fixed the situation where the setting to trim threads between characters in alphabet patterns
does not work correctly when the jump stitch trimming is "ON" in the setting screen.
Version 2.00 update provided the following changes
1. The following new features have been added with Version 2.00.
・
The Link function has been added.
・
You will be able to display the thread color for “PES” format data according to the
machine setting, or from the Palette, Palette petite of Palette PTS (embroidery editing
software).
・
The length of time until the embroidery machine will stop can be viewed in the
embroidering screen.
・
If the temporary needle bar setting has been applied, the icon (
) indicating the
selected needle bar in the embroidering screen can now be viewed.
・
Additional characters have been added to several of the alphabet font patterns (
).
Refer to the following manual for the details of these new features.
Manual for New Features
(PDF, English, French and Spanish, File size: 5.42MB)
2. Stitch generation was changed so that extra stitches are not sewn when the “space”
character is selected during text embroidery.
3. Improved the starting needle point to 180 degrees when rotating large split designs when
imported as PES data.
4. Improved the position of rotating the pattern 180 degrees when embroidering with a cap
frame.
5. Improved the data recognition for .phc file saved by previous models (EMP6/ BMP6/
BMP8).
Version 1.05 update provided the following changes
1. Fix the situation where the machine will recognize the Tajima (.dst) embroidery data
correctly in design patterns which are more than approximately 200mm (8 inches) in width.
2. Fix the situation where the machine will recognize the Cylinder Frame correctly.
3. Split embroidery patterns can be rotated over 90 degrees.