Baby Lock Pro-Stitcher BLPS3 Instruction And Reference Manual - 5. Design Menu

Pro-Stitcher User Manual

Design Menu  | 5.1

5. Design Menu

The Design menu functions open, modify, position, and save quilting designs. Much of what you will do 

with Pro-Stitcher will be from this menu. 

After you select Design, two clusters of buttons appear in the lower-left and lower-right corners of the 

screen.

The four buttons in the lower-left corner of the Design screens turn on or off the display of a portion of the 

design.

The four buttons in the lower-right corner of the Design screen help to keep track of changes made to the 

design.

Design history

•   Press History to show a list of the functions that have been performed since opening a design. 

Red dots mark the start 

of a jump, the point 

where Pro-Stitcher 

stops stitching so you 

can tie off the thread. 

The purple dashed line 

shows the jumps (not 

stitched). 

Green dots mark the 

end of the jump and the 

beginning of the next 

stitching segment. 

Start (green) and stop 

(red) points

Bounding box

Design

Use these buttons  

to keep track of 

changes you make  

to the design.

Use these buttons to display 

portions of the design.

Select to show or 

hide the design.

Select  to show or 

hide the jump points.

Select to show or hide 

the blue bounding box 

and the area box.

Select to show or hide 

the start and stop 

points.

Select to undo the  

last function performed.

Select to baseline a  

design, or have the  

software treat it as  

a new design.

Select to redo the last

function that was undone.

Select to see a list of the 

functions that have been 

performed since opening a 

design.