Baby Lock Pro-Stitcher BLPS3 Instruction And Reference Manual - Point 2 Point

Pro-Stitcher User Manual

Design Menu  | 5.19

To stretch a design to fill an area

You can stretch a design to fit either the width or the height of an area. 

•  First define an area and then choose either the Stretch Width or the Stretch Height button.

To calculate the optimal number of repeats for an area

•  Press Fit to have Pro-Stitcher calculate the optimal number of repeats in both height and width. You 

can add more horizontal or vertical repeats as desired and then select Stretch Width and Stretch 

Height to fit them to the area.  

Point 2 Point 

Some designs are intended to be linked together horizontally or vertically but must be overlapped for 

the start and end points to match up. The Point 2 Point buttons link the start and end points of repeated 

designs. The following image shows the design before selecting Point 2 Point. 

To join horizontally repeated designs

•  To link designs horizontally, ensure the start and end points are at the same height, or vertical coor-

dinate. Then select Horizontal Point 2 Point to align the designs such that the end point of the first 

design matches up with the start point of the next design.

Stretches the 

design to fit the 

width of the area.

Calculates the  

optimal number of  

repeats both  

vertically and  

horizontally.

Stretches the design 

to fit the height of the 

area.

Aligns horizontally 

repeated designs 

such that the end 

point of the first 

design matches 

up with the start 

point of the next 

design.

Aligns vertically  

repeated designs  

such that the end 

point of the first  

design matches up 

with the start point  

of the next design.