Zarauz con deluxe 9 - 36 kg. 1 2 3 child safety seat instruction manual of child restraint for childs from group grup 1 >9 to 18 kg grup 2 >15 to 25 kg grup 3 > 22 to 36 kg.
2 zarauz con 1. This child seat suitable children from 9 kgs to 18 kgs (group 1) and from 15 kgs to 36 kgs (group 2.3). 2. Please read this instruction carefully otherwise incorrect installation will cause seriously hurt. In this case. The manufacturer will not take any responsibility. 3. This child...
3 www.Babyauto.Com group 1/2/3 1 2 3 *****poignée de réglage de l´appuie-tête headrest belt shoulder pad belg guide slot harness adjuster lever safety buckle backrest harness adjuster strap shoulder belt slot *****protections latérales renforcées harness yoke booster features safety clip bolsa para ...
4 zarauz con child restraint under no circumstances, should any child car seat be used on front passenger seat with an active airbag. Warning: the child seat must only be installed using a lap and diagonal seat belt. Important this child seat is suitable for conventional use in all cars equipped wit...
5 www.Babyauto.Com 1 2 3 group 1/2/3 fitting the car seat / only use for group 1 (9-18 kg) do not use the child seat on a passenger seat fitted with an active airbag. Warning: step 1. Place the child seat firmly against theback of the vehicle seat. Step 2. Thread the diagonal belt at the behind andf...
6 zarauz con tightening the harness pull the shoulder straps upwards to remove the slack from the lap sections of the harness then pull the adjuster strap until the harness is fully tightened. The harness should be adjusted as tightly as possible without causing discomfort to your child. Ensure that...
7 www.Babyauto.Com 1 2 3 tightening and slackening the harness insert the lap and the diagonalbelt into the belt buckle ,you will hear a click when is correctly inserted.Pull on it to check it is securely fitted. Then adjust the tightness of the belts. Pull the lap and diagonal seat belt tightly and...
8 zarauz con 1 2 3 fitting the car seat / only use for group 2-3 (15-36kg) child restraint step 1. You will have to remove the harness and crotch strap first . To remove the harness, remove the shoulder belt from the belt connecting part as shown and then pull the shoulder belt through the shoulder ...
9 www.Babyauto.Com 1 2 3 installation of the booster group 1/2/3 step 1. Pushing back the backrest. Step 2. Then taking out the backrest fom the booster. Step 3. Put the booster on the vehicle seat, fix it by the adult belt after the child sits on the baby seat. Throught the shoulder guide with the ...
10 zarauz con 1 2 3 cleaning & maintenance child restraint step 1. To remove the cover for cleaning, you must release the shoulder straps from the yoke and until the cords at the back of the child seat, pull these through to the front of the seat . Step 2-3. Take off the harness system and the seat ...
11 www.Babyauto.Com group 1/2/3 washing instructions: · the cover is removable and washable at 30ºc, line dry only. · machine wash, cold · do not bleach · dryclean, any solvent except trichloroethylene · do not tumble dry · do not iron · the child restraint must not be used without the cover. · the ...
Www.Babyauto.Com safety babyauto sl c/ amezti nº 3, apdo. Correos 70 20800 zarauz (gipuzkoa) spain t. +34 943 83 30 13 e. Info@babyauto.Com.
