Babyauto Zarauz Con Deluxe Instruction Manual - page 7
7
www.babyauto.com
1
2
3
TIGHTENING AND SLACKENING THE HARNESS
Insert the lap and the diagonalbelt into
the belt buckle ,you will hear a click
when is correctly inserted.pull on it to
check it is securely fitted. Then adjust
the tightness of the belts.
Pull the lap and diagonal seat belt tightly
and attach the belt clip to shoulders
straps as closely as you can to the seat
belt buckle,but not touching it .
Finally check that the seat is firm and
secure ,if it is wobbly or slack ,you must
tighten both again until the seat is
secure.
Slackening the harness
The harness is slackened by pressing the
lever (under the seat cover) on the front
of the seat.
Press down on the label marked “Press”
as you grip the two shoulder straps with
your other hand. Pull the shoulder straps
towards you to loosen the harness.
Take care when you adjust the shoulder
straps that you do not trap the harness
adjuster straps as you press the lever
down.
Group 1/2/3