BaByliss 2800DU Manual - Spiral Sleeve Attachment
SPIRAL SLEEVE ATTACHMENT
To create ringlets and tousled curls:
- Use the 19mm tong with the spiral sleeve
NOTE: The spiral sleeve can only be used with the 19mm tong
attachment.
Fitting The Spiral Sleeve Attachment
• With the 19mm tong already inserted in the appliance, ensure the
barrel is completely cool. Push the spiral sleeve over the tong and
the long lever.
Instructions For Use - Spiral Sleeve
• Section dry hair evenly and comb through before styling.
• Press the spring lever and place the end of the hair section under the
spoon. Release the spring lever to secure the section of hair. To avoid
crimped ends, ensure the ends are securely wound under the spoon
in the direction of the desired curl.
• Place the spring lever on the top of the hair section and twist the
appliance upwards, winding the hair around the tong, keeping the
hair within the spiral guides. Wind the hair upwards, taking care to
avoid the hot surface of the barrel touching the scalp.
• Hold in place for 5-10 seconds, depending on the length and texture
of the hair.
• To remove the tong, twist the appliance downwards, unwinding the
hair from around the barrel and press the spring lever to release the
hair section.
• Repeat as necessary.
• After use, switch off and unplug the appliance. Allow to cool before
storing away.
BRUSH SLEEVE ATTACHMENT
To create shape, texture and volume:
- Use the 19mm tong with brush sleeve.
NOTE: The brush sleeve can only be used with the 19mm tong
attachment.