Babymoov Visio Care A014403 Instruction Manual - Instruction Manual
9
BABY MONITOR VISIO CARE
• Instruction Manual
Thank you for choosing our Baby monitor Visio Care. We recommend you read these instructions
carefully in order to use your Baby monitor to best advantage and ensure it continues to operate as
long as possible. If you should find a fault, however, or if you have any problem, please contact our
company.
• Range 300 m in an open space.
• 2.4" LCD screen.
• High-def digital picture.
• Automatic night vision.
• The receiver works with a lithium battery (supplied)
rechargeable on its base.
• Visible and audible alarms.
• Adjustable sound volume on the receiver.
• Low battery indicator.
• Voice activated transmitter (advised) or continuous
transmission.
• Adjustable brightness on the receiver.
• Adjustable camera.
• Rainbow nightlight on the transmitter.
• Continuous nightlight, or voice-activated.
INSTRUCTION MANUAL
WARNINGS
- The Baby monitor Visio Care should not be seen as a medical device. In addition to using Baby monitor
Visio Care, it is strongly recommended that an adult checks on your baby directly, on a regular basis.
Premature babies or children considered to be at risk should be monitored by your pediatrician or a health
professional.
- Never go away from your baby outside the house, even a short moment.
- The supply terminals are not to be short-circuited.
- Always use the supplied battery for the receiver: if the battery is damaged it must be replaced by the
manufacturer, the after-sales service or people with similar qualifications, in order to avoid any risk.
- For best performance of your babyphone, and to reduce any interference, we recommend you do not plug
any other electrical appliance into the same socket as your babyphone. (Do not use multiple socket
outlets).
POWER SUPPLY
A / Transmitter
The transmitter operates on AC mains. Connect
the output plug of AC 6V adapter to DC jack (17)
of the transmitter. Connect the adapter to the
mains.
Baby monitor Visio Care
EN
FUNCTIONS
DC 6V
PRECAUTIONS
- Use only the supplied AC adapters, use of other adapters may cause damage to the baby monitor.
- When not using the monitor for as long period of time, remove all batteries from the transmitter and receiver
to avoid damage due to battery leakage.
- Disconnect the AC adapter from the wall outlet when the monitor is not to be operated.
- The baby monitor is best performed within a temperature range of -9°C to +50°C .
- Do not leave the monitor expose to strong sunlight for a long time or nearby any heat source, moisture
and excessive dusty environment.
- Do not open the cabinet, no serviceable part inside.
- Waste Electrical and Electronic Equipment should be disposed of by selective collection. Do not throw electrical
and electronic equipment away with unsorted household waste, but dispose of it at a selective collection
point.