Back to Basics Smoothie Choice Instruction Manual - page 4

A

SSEMBLING 

Y

OUR 

S

MOOTHIE 

C

HOICE

™

Before assembling your Smoothie Choice

™

 wash all parts, 

except for motor base in 

warm, soapy water, rinse thoroughly and dry.  Unscrew and disassemble the valve 

for cleaning (see Cleaning Your Smoothie Choice

™

 section).  To prolong the life of 

your smoothie maker, 

do not wash parts in the dishwasher. 

1.  Position the rubber gasket down onto the circular flat surface in the blade base. 

2.  Screw the blade base onto the bottom of the blending jar by twisting the blade 

base clockwise until tightened.  Make sure that the blade base is tightly fastened 

to the blending jar and that the rubber gasket is properly compressed between 

the blending jar and the blade base. 

3.  Press the lid onto the top of the blending jar.  Press the clear lid cap in the 

center of the lid or place the stir stick through the center of the lid if blending 

liquids or frozen drinks. 

4.  Place the blending jar onto the motor base so the bottom of the blade base is 

sitting flat on the motor base. 

5.  Plug in the cord.  Your smoothie maker is now ready to use. 

Stir Stick 

Lid 

Lid Cap 

Blending Jar 

Dispensing Valve 

Rubber Gasket 

Blade Base 

Motor Base 

4