Made in china ins- 55036-a-columbus playhouse-eng 01/19/18 • owner's manual • frequently asked questions • assembly instructions • warranty information columbus playhouse model: # 55036 booklet includes: for the most up to date assembly manual, to register your set or to order replacement parts plea...
• 18+ years of experience servicing big box retailers and direct consumers • highly skilled, specialized, courteous, professional service technicians • over 140,000 installations annually • satisfaction guarantee • flexible appointments, including weekends • coverage across the nation • white glove ...
Please have the following information when you make your call: 1 – model number of the product located on the front of the assembly manual 2 – desription of the part from the parts list por favor tenga visible la siguiente informaciÓn cuando llame: 1 - nÚmero de modelo del producto que se encuentra ...
Owner’s manual play house owner ph-2011 dear customer: please read entire booklet completely before beginning the assembly process. Equipment is recommended for use by children 2 to 10 years of age. Structures are not intended for public use. The company does not warranty any of its residential stru...
Owner’s manual play house owner ph-2011 please refer to the assembly section of the assembly manual for maximum fall height. Positioning your play house 1. The play house is designed to be installed on a level surface by an adult with an adult helper. Place in a flat area of your yard to minimize gr...
Owner’s manual play house owner ph-2011 the following chart explains the fall height in feet from which a life threatening head injury would not be expected critical heights in feet (m) of tested materials material uncompressed depth compressed depth 6" (152mm) 9" (228mm) 12" (304mm) to 9" (228mm) w...
Owner’s manual play house owner ph-2011 • all moving parts including swing seats, ropes, cables, and chains for wear, check rust, or deterioration. Replace as needed. • check metal parts for rust. If found, sand and repaint using non lead-based paint meeting the requirements of title 16 crf part 130...
Owner’s manual play house disposal instructions: when the play house use is no longer desired, it should be disassembled and disposed of in such a way that no unreasonable hazards will exist at the time the unit is discarded. This package must be kept because it contains important information! Owner...
Owner’s manual play house owner ph-2011 appendix a information on playground surfacing materials: the following information is from the united states consumer product safety commission’s information sheet for playground surfacing material; also see the following website for additional information:. ...
Owner’s manual play house owner ph-2011 11 this information has been extracted from the cpsc publications “playground surfacing — technical information guide” and “handbook for public playground safety.” copies of these reports can be obtained by sending a postcard to: office of public affairs, u.S....
Play house assembly manual faqs: 1. Does the area for the play house need to be level? Yes. Backyard discovery recommends the play house be positioned on a flat level area for maximum safety and durability. Any stakes provided should be used to secure it firmly to the ground. 2. What size area is re...
(level 24") (square) (tape measure) (claw hammer) (cordless drill or electric drill) (an adult w/ an adult helper) (rubber mallet - optional) (ladder) (phillips screw driver) (drill attachments: phillips head) tools required for installation: (these are the tools that are generally required for asse...
Safety and assembly information selecting the correct location for your play product is important for your children’s safety and the product’s longevity dimensions: • the chalet has one layout option. Layout ground dimension safe play area* 3'-10 11 16 " x 3'-9 3 8 " x 56 1 2 " tall 15'-10 11 16 " x...
Parts identification wood components (not to scale) h1 - center counter support - w4l05576 1"x3 3/8"x8 3/8" (24x86x213) (1) j1 - outer counter support - w4l05575 1"x2 3/8"x8 3/8" (24x60x213) (2) l1 - window upright - w4l05573 5/8"x4 3/8"x27 3/4" (16x112x705) (4) l2 - rear counter top - w4l05577 5/8"...
Parts identification wood components (not to scale) wp1 - left front wall panel - w2a01759 1 1/8"x12 5/8"x39 7/8" (27x320x1014) (1) dp1 - door panel - w2a01761 1 1/8"x13"x17 1/4" (27x330x438) (1) (1) (1) (1) wp2 - right front wall panel - w2a01760 1 1/8"x12 5/8"x39 7/8" (27x320x1014) wp3 - left righ...
Parts identification wood components (not to scale) wp5 - center right side wall panel - w2a01764 1 1/4"x15 5/8"x13" (32x396x330) wp6 - rear wall panel - w2a01765 1 1/8"x39 1/8"x13" (27x994x330) wp7 - left wall panel - w2a01766 1 1/8"x38 3/4"x13" (27x984x330) rp1 - peak roof panel - w2a01767 1 3/8"x...
Parts identification hardware bolt wh 5/16x1 1/4 - h100009 (4) screw pfh 6x1 - h100174 (4) screw pfh 8x1 - h100085 (9) screw pfh 8x1 1/8 - h100088 (55) screw pfh 8x1 1/4 - h100087 (29) screw pfh 8x1 1/2 - h100086 (6) screw pwh 8x3/4 blk - h100392 (9) screw pwh 8x5/8 blk - h100202 (26) screw pwh 8x5/...
Parts identification accessories (not to scale) surface mount basin - a6p00032 (1) 90° l-bracket - blk - a4m00555 (11) "a" revision tag - a100314 (1) faucet kit - a6p00024 (1) metal tie strap - a4m00517 (1) stove kit - a6p00025 (1) byd id tag (medium) ages 2 to 10 - a4m00528 (1) knob kit - a6p00020 ...
Playhouse assembly step 1: 90° l-bracket - blk (1 plc) screw pwh 8x5/8 blk (2 plcs) screw pwh 8x5/8 blk (2 plcs) 90° l-bracket - blk (1 plc) screw pwh 8x5/8 blk (4) 90° l-bracket - blk - a4m00555 (2) wp3 wp2 wp2 - right front wall panel - w2a01760 1 1/8"x12 5/8"x39 7/8" (27x320x1014) wp3 - left righ...
Step 2: front right screw pfh 8x1 (4 plcs) screw pfh 8x1 (4) wp5 wp5 - center right side wall panel - w2a01764 1 1/4"x15 5/8"x13" (32x396x330) (1).
Step 3: front right screw pfh 8x1 (4 plcs) screw pfh 8x1 (4) (1) wp4 wp4 - right right side wall panel - w2a01763 1 1/8"x12 5/8"x39 7/8" (27x320x1014).
Step 4: rear front right screw pwh 8x5/8 blk (4 plcs) screw pwh 8x5/8 blk (4) (1) 90° l-bracket - blk (2 plcs) wp6 wp6 - rear wall panel - w2a01765 1 1/8"x39 1/8"x13" (27x994x330) rear right 90° l-bracket - blk - a4m00555 (2).
Step 5: rear left front right screw pwh 8x5/8 blk (4 plcs) screw pwh 8x5/8 blk (4) (1) wp7 90° l-bracket - blk (2 plcs) wp7 - left wall panel - w2a01766 1 1/8"x38 3/4"x13" (27x984x330) 90° l-bracket - blk - a4m00555 (2).
Step 6: rear left front right screw pwh 8x5/8 blk (4 plcs) screw pwh 8x5/8 blk (4) (1) 90° l-bracket - blk (2 plcs) wp1 wp1 - left front wall panel - w2a01759 1 1/8"x12 5/8"x39 7/8" (27x320x1014) 90° l-bracket - blk - a4m00555 (2) 3/16" gap required.
Step 7: rear left front right screw pfh 8x1 1/4 (4 plcs) screw pfh 8x1 1/4 (4) j1 j1 j1 - outer counter support - w4l05575 1"x2 3/8"x8 3/8" (24x60x213) (2) flush flush.
Step 8: rear left front right screw pfh 8x1 1/2 (1 plc) screw pfh 8x1 1/2 (1) h1 - center counter support - w4l05576 1"x3 3/8"x8 3/8" (24x86x213) (1) h1.
Step 9: rear left front right screw pfh 8x1 1/8 (4 plcs) screw pfh 8x1 1/8 (4) l1 l1 l1 - window upright - w4l05573 5/8"x4 3/8"x27 3/4" (16x112x705) (2).
Step 10: rear left front right screw pwh 8x5/8 blk (6 plcs) screw pfh 8x1 1/8 (4) l1 - window upright - w4l05573 5/8"x4 3/8"x27 3/4" (16x112x705) (2) screw pfh 8x1 1/8 (4 plcs) screw pwh 8x5/8 blk (6) 90° l-bracket - blk - a4m00555 (3) l1 l1.
P step 11: rear left front right screw pfh 8x1 1/8 (6 plcs) screw pfh 8x1 1/8 (6) l2 - rear counter top - w4l05577 5/8"x4 3/8"x36 3/4" (16x112x934) (1) l2.
Step 12: rear left front right screw pfh 8x1 1/8 (6 plcs) screw pfh 8x1 1/8 (6) l3 - front counter top - w4l05578 5/8"x4 3/8"x37 3/8" (16x112x950) (1) l3.
Step 13: rear left front right screw pwh 8x3/4 blk (8 plcs) screw pwh 8x3/4 blk (8) 1/2" metal tie strap (1 plc) metal tie strap - a4m00517 (1) 13 7/8".
U step 14: rear left front right screw pfh 8x1 1/8 (2 plcs) screw pfh 8x1 1/8 (2) l5 l5 - side header board - w4l05580 5/8"x4 3/8"x39 3/8" (16x112x1000) (1).
V step 15: rear left front right screw pfh 8x1 1/8 (2 plcs) screw pfh 8x1 1/8 (2) l5 - side header board - w4l05580 5/8"x4 3/8"x39 3/8" (16x112x1000) (1) l5.
Step 16: rear left front right screw pfh 8x1 1/4 (4 plcs) l4 l4 - front header board - w4l05579 5/8"x4 3/8"x40 3/8" (16x112x1026) (1) screw pfh 8x1 1/2 (2 plcs) screw pfh 8x1 1/2 (2) screw pfh 8x1 1/4 (4) 5/16 1.
Step 17: rear left front right screw pfh 8x1 1/4 (4 plcs) screw pfh 8x1 1/4 (4) l6 l6 - rear header board - w4l05581 5/8"x4 3/8"x40 3/8" (16x112x1026) (1) screw pfh 8x1 1/8 (2 plcs) screw pfh 8x1 1/8 (2) 5/16 1.
Step 18: rear left front right screw pwh 8x5/8 blk (2 plcs) screw pwh 8x5/8 blk (2) "a" revision tag (1 plc) "a" revision tag - a100314 (1).
Step 19: rear left front right screw pwh 8x5/8 (2) surface mount basin - a6p00032 (1) screw pwh 8x5/8 (2 plcs).
Step 20: left right screw pfh 8x1 1/2 (2 plcs) screw pfh 8x1 1/2 (2) faucet kit (1 plc) 3/4" faucet kit - a6p00024 (1).
Ad step 21: rear left front right screw pfh 8x1 1/8 (4 plcs) screw pfh 8x1 1/8 (4) stove kit (1 plc) stove kit - a6p00025 (1).
Step 22: rear left front right screw pfh 8x1 1/8 (5 plcs) screw pfh 8x1 1/8 (5) n1 - window shelf - w4l05574 5/8"x2 3/8"x38 3/4" (16x60x984) (1) n1.
Step 23: rear left front right screw pfh 6x1 (4 plcs) screw pfh 6x1 (4) 5/8" up from metal tie strap. (1) dp1 dp1 - door panel - w2a01761 1 1/8"x13"x17 1/4" (27x330x438).
Step 24: rear left front right screw pfh 8x3/4 (2 plcs) included in kit face plate (1 plc) knob kit (1 plc) latch (1 plc) screw pfh 8x1 (1 plc) included in kit knob kit - a6p00020 (1).
Step 25: left right screw pfh 8x1 1/4 (3 plcs) screw pfh 8x1 1/4 (3) n3 2 3/8" n3 - door stop - w4l04761 5/8"x2 3/8"x3 7/8" (16x60x100) (1).
Aj step 26: rear left front right bolt wh 5/16x1 1/4 (4 plcs) washer lock ext 8x19 (4 plcs) t-nut 5/16 (4 plcs) bolt wh 5/16x1 1/4 (4) washer lock ext 8x19 (4) t-nut 5/16 (4) m1 - gable board - w4l05582 5/8"x3 3/8"x26 1/2" (16x86x674) (4) m1 m1 m1 m1.
Step 27: rear left front right screw pfh 8x1 3/4 (8 plcs) screw pfh 8x1 3/4 (8) rp1 rp1 rp1 - peak roof panel - w2a01767 1 3/8"x7 5/8"x44 5/8" (35x195x1134) (2).
Step 28: rear left front right screw pfh 8x1 3/4 (8 plcs) screw pfh 8x1 3/4 (8) (2) rp2 rp2 rp2 - middle roof panel - w2a01768 1 3/8"x9 3/4"x44 5/8" (35x248x1134).
Step 29: rear left front right screw pfh 8x1 3/4 (8 plcs) screw pfh 8x1 3/4 (8) (2) rp3 - lower roof panel - w2a01769 1 3/8"x9 3/4"x44 5/8" (35x248x1134) rp3 rp3.
Step 30: rear left front right screw pfh 8x1 1/4 (4 plcs) screw pfh 8x1 1/8 (16) screw pfh 8x1 1/8 (4 plcs) screw pfh 8x1 1/8 (8 plcs) n87 n86 n86 k80 centered two sunburst assemblies required. Screw pfh 8x1 1/4 (4) n86 - sunburst spoke - w103696 5/8"x2 3/8"x7 3/4" (16x60x198) (4) n87 - vertical sun...
Step 31: rear left front right screw pfh 8x1 1/4 (8 plcs) screw pfh 8x1 1/4 (8) flower pot holder flower pot holder flower pot holder - a6p00023 (2).
Step 32: left front right screw pwh 8x7/16 (2 plcs) screw pwh 8x7/16 (2) byd id tag (medium) ages 2 to 10 4" 5 5/8" byd id tag (medium) ages 2 to 10 - a4m00528 (1).
Limited warranty this limited warranty by backyard discovery applies to products manufactured under the backyard discovery brand or its other brands including but not limited to backyard botanical, adventure playsets, and leisure time products. Backyard discovery warrants that this product is free f...
Warranty. Backyard discovery disclaims all other representations and warranties of any kind, express or implied. This warranty gives you specific legal rights. You may have other rights as well which vary from state to state or province to province. This warranty excludes all consequential damages, ...