1. DL manuals
  2. Badger Basket
  3. Baby Accessories
  4. 00710
  5. Assembly Instructions Manual

Badger Basket 00710 Assembly Instructions Manual

Summary of 00710

  • Page 1

    1.0/0611/lf model numbers: visit us online at www.Badgerbasket.Com toll-free customer service: 1-800-236-1310 (monday to thursday 7:30 am-3:30 pm cst) web: http://www.Badgerbasket.Com/parts • e-mail: parts1@badgerbasket.Com mail: po box 227, edgar, wi 54426-0227 • phone: 715-352-2311 • fax: 715-352-...

  • Page 2: Before You Begin Assembly:

    1.0/0611/lf before you begin assembly: check all parts and hardware. If anything is missing or not satisfactory, please do not call the store or return the product to them. Please go online to: http://www.Badgerbasket.Com/parts most problems are resolved without you needing to leave home. When email...

  • Page 3: Fall Hazard:

    1.0/0611/lf • suffocation hazard - infants can suffocate: » in gaps between an extra pad and the side of the bassinet, » on soft bedding. Never add a mattress, pillow, comforter, or padding. Use only the pad and/or bedding provided by the manufacturer. If a sheet is used with the pad, use only the o...

  • Page 4: Parts and Hardware

    1.0/0611/lf phillips screwdriver pliers hammer bassinet parts: (a) 4 x caster wheels (b) 4 x caster sleeves (c) 2 x bassinet legs (d) 1 x bassinet body (e) 4 x 1-5/8” screws (f) 8 x lock nuts (g) 2 x leg rails (h) 4 x 7/8” screws (i) 1 x mattress pad (not shown) (j) 1 x hood hoop frame (2 pieces) be...

  • Page 5

    1.0/0611/lf assembling the bassinet: step 1: insert the four caster wheels (a) into the four caster sleeves (b). Make sure the shank of the wheel is firmly seated into the sleeve (tap gently with a hammer if needed). See picture 1. Step 2: insert the four caster sleeves (b) into the caster holes on ...

  • Page 6: Picture 6

    1.0/0611/lf picture 5 rails inserted into rail pockets on legs. Secured in place with four 7/8” screws. Picture 4 four lock nuts inserted into rails. Push in firmly so nut snaps into place and lines up with the hole in the end of the rail. Step 5: insert four lock nuts (f) into the pockets on the in...

  • Page 7

    1.0/0611/lf picture 7 step 9: take the fabric hood cover (k) and dress it onto the hood hoop frame. The elastic loops on the cover slip over the clips on the frame to keep the fabric in place. Snap the clips of the hood hoop frame (j) onto the spools that are molded on the top, inside rim of the bas...