Badger Basket 00710 Assembly Instructions Manual - page 5
1.0/0611/LF
ASSEMBLING THE BASSINET:
STEP 1:
Insert the FOUR CASTER WHEELS (A) into the FOUR CASTER SLEEVES (B). Make sure the
shank of the wheel is firmly seated into the sleeve (tap gently with a hammer if needed). See PICTURE 1.
STEP 2:
Insert the FOUR CASTER SLEEVES (B) into the caster holes on the bottom of the TWO BAS-
SINET LEGS (C). Make sure the wheels are pushed securely into the holes (tap gently with a hammer
if needed). See PICTURE 2.
PICTURE 1
Left: Caster Sleeve and Caster Wheel
Right: Sleeve and Wheel assembled
PICTURE 2
Caster Sleeve with Wheel inserted into hole on Bassinet
Leg. Repeat to attach all four Wheels.
PICTURE 3
Bassinet Leg positioned in leg pockets on Bassinet. Se-
cured with two 1-5/8” Screws and two Lock Nuts.
Repeat for other Leg.
Lock Nuts
STEP 3:
Turn over the BASSINET (D). Take ONE BASSINET LEG (C) and position it in the leg cups
on the underside of the BASSINET (D) with the finished side* of the leg facing out. Secure the LEG
(C) to the BASSINET (D) using TWO 1-5/8” SCREWS (E) and TWO LOCK NUTS (F). It helps to
hold the NUT with a pair of pliers while you turn the SCREW. The nuts go on the inside and the screws
on the outside. See PICTURE 3.
* The finished side of the leg says BADGER on it.
STEP 4:
Repeat STEP 3 to attach the other BASSINET LEG (C) using TWO 1-5/8” SCREWS (E) and
TWO LOCK NUTS (F).