Badger Meter M-series Installation And Operation Manual - page 22
22
Select/Press
E
to:
•
enter (open) a menu or sub-menu topic at which the
arrow is pointing
•
select between ON/OFF parameter settings for
each select/press
•
Move the parameter numeric setting underscore
(
_
) one place to the right for each select/press
when inputting parameter numeric settings
•
SAVE a parameter numeric setting. After all
numbers are input, press
E
and the setting is
saved, the screen closes and the previous screen
with the arrow pointing at “Exit this Menu” shows
again. Select
E
again. That screen closes and the
previous screen appears with the arrow pointing at
its “Exit this Menu”
•
Continue
selecting
E
to return to the Main Screen.
•
If your amplifier is not password protected, press
E
from the Main Screen to access the MAIN MENU.
The MAIN MENU is a list that provides access to all
amplifier menus and parameters
•
If your amplifier is password protected and E is
pressed from the Main Screen, the PASSWORD
screen opens (reference PASSWORD??? 01, on
page 26)
Amplifier Access Switches/Buttons
Accessing amplifier menus, movement to and between
screens, parameter selections and settings are all available
using +, - and E buttons.
· Move the parameter numeric setting underscore
( _ )one place to the right for each select/press
when inputting parameter numeric settings.
· SAVE a parameter numeric setting. After all
numbers are input, press
E
and the setting is
saved, the screen closes and the previous screen
with the arrow pointing at "Exit this Menu" shows
again. Select
E
again. That screen closes and
the previous screen appears with the arrow
pointing at its “Exit this Menu”.
· Continue selecting
E
to return to the Main Screen.
· If your amplifier is not password protected,
pressing
E
from the Main Screen accesses the
MAIN MENU. The MAIN MENU is a list that
provides access to all amplifier menus and
parameters.
· If your amplifier is password protected and
E
is
pressed from the Main Screen, the PASSWORD
screen opens (reference PASSWORD??? 01, on
page 26)
How to Program
Amplifier screens, menus and program parameters are
arranged in the familiar “branching” format where the MAIN
MENU screen is a list of selections. The Main Menu list
provides access to other lists, selections or parameter
screens which provide input for meter programming.
The amplifier program uses three types of screens; a List
screen, an Input Numbers screen and a select ON or Off
screen.
MAIN MENU 00
>Exit this Menu Meter
Setup Measurements
Inputs/Outputs
Clear Totals
Communications
Info/Help
Logout
Language Select
Sample List Screen
Sample Input Numbers Screen
Sample Select ON or OFF Screen
The following pages introduce you to the screen formats,
describe how to maneuver to and through them and provide
some specifics about programming terminology and
parameters.
If possible, have access to your amplifier display and
controls and perform these screen manipulations.