Baileigh DC-2100C Operator's Manual - page 9
7
7
SAFETY PRECAUTIONS (cont.)
11. Check for damaged parts. Before using any tool or machine, carefully check any part that
appears damaged. Check for binding of moving parts that may affect proper machine
operation.
12. Observe work area conditions. DO NOT use machines or power tools in damp or wet
locations. Do not expose to rain. Keep work area well lighted. DO NOT use electrically
powered tools in the presence of flammable gases or liquids.
13. DO NOT bypass or defeat any safety interlock systems.
14. Know the location of the ON -
OFF switch and the “E”- STOP button.
15. Keep visitors a safe distance from the work area.
16. Keep children away. Children must never be allowed in the work area. DO NOT let them
handle machines, tools, or extension cords.
17. DO NOT operate machine if under the influence of alcohol or drugs. Read warning labels on
prescriptions. If there is any doubt, DO NOT operate the machine.
18. DO NOT touch live electrical components or parts.
19. Be Sure all equipment is properly installed and grounded according to national, state, and
local codes. If machine is equipped with a three-prong plug, it should be plugged into a
three-hole electrical receptacle. If an adapter is used to accommodate a two-prong
receptacle, the adapter plug must be attached to a known ground. Never remove the third
prong.
20. Inspect power and control cables periodically. Replace if damaged or bare wires are
exposed. Bare wiring can kill!
21. Maintain machine in top condition. Keep clean for best and safest performance. Follow
instructions for lubricating and changing accessories.
22.
Reduce the risk of unintentional starting. Make sure switch is in “OFF” position before
plugging in power cord.
23. Never leave machine running unatte
nded. TURN POWER OFF. Don’t leave machine until it
comes to a complete stop.
24. Make sure machine is disconnected from power supply while motor is being mounted,
connected or reconnected.
25. Warning: The dust generated by certain woods and wood products can be injurious to your
health. Always operate machinery in well ventilated areas and provide for proper dust
removal. Use wood dust collection systems whenever possible.