Baileigh SD-255 Operator's Manual - page 9
7
7
SAFETY PRECAUTIONS (cont.)
5. Feeding Stock. DO NOT stand in the direct path of a piece part at the in-feed end when
feeding the stock. NEVER sand more than one piece part at a time or jam the piece part
into the sander. Firmly grasp the piece part in both hands and using light pressure, ease the
piece part into the machine.
6. Keep work area clean. Cluttered areas invite injuries.
7. Overloading machine. By overloading the machine you may cause injury from flying parts.
DO NOT exceed the specified machine capacities.
8.
Stock Dimensions. DO NOT sand stock thinner than 1/8” (3mm), narrower than 2” (51mm),
or shorter than 8” (203mm).
9. Dress appropriate. DO NOT wear loose fitting clothing or jewelry as they can be caught in
moving machine parts. Protective clothing and steel toe shoes are recommended when
using machinery. Wear a restrictive hair covering to contain long hair.
10. Hand Protection. DO NOT place hands near or in contact with the sanding drum during
machine operation.
11. Use eye and ear protection. Always wear ISO approved impact safety goggles
12. Do not overreach. Maintain proper footing and balance at all times. DO NOT reach over or
across a running machine.
13. Stay alert. Watch what you are doing and use common sense. DO NOT operate any tool or
machine when you are tired.
14. Check for damaged parts. Before using any tool or machine, carefully check any part that
appears damaged. Check for binding of moving parts that may affect proper machine
operation.
15. Observe work area conditions. DO NOT use machines or power tools in damp or wet
locations. Do not expose to rain. Keep work area well lighted. DO NOT use electrically
powered tools in the presence of flammable gases or liquids.
16. DO NOT bypass or defeat any safety interlock systems.
17. Know the location of the ON -
OFF switch and the “E”- STOP button.
18. Keep visitors a safe distance from the work area.
19. Keep children away. Children must never be allowed in the work area. DO NOT let them
handle machines, tools, or extension cords.
20. DO NOT operate machine if under the influence of alcohol or drugs. Read warning
labels on prescriptions. If there is any doubt, DO NOT operate the machine.