Baird TI4203BC User Manual - page 7

7

Important installation instructions

NOTE: For safety, you are advised to seek the assistance of a second person when installing or removing the 

stand. Laying the TV fl at on a table withe bottom of the TV level with the edge makes fi tment and removal 

much easier.

Detaching the Stand

1) Remove the screws highlighted

2) Although there are no live parts exposed when removing the stand, (in the 

event of wall mounting the TV) for aesthetic purposes, included in the accessory 

pack is a cover plate which can be clipped into the underside of the TV.

IMPORTANT - Before drilling any holes in the wall ensure you are not 

drilling where there could be any electric wires, water or gas pipes.

Wall mounting the TV

This television requires a VESA STANDARD wall mount, or equivalent (The size of the mount will vary depending 

upon the screen size of your TV). 

1) Your TV is provided with four hexagonal spacers to attach your wall mount.

2) The wall mount can now be easily attached to the spacers using suitable screws. The positions of the spacers 

is indicated in the diagram below.

Important – If wall mounting this TV, only use the spacers already provided in the wall mounting holes. Using 

other screws which are longer could cause irreparable damage to internal parts.

For optimum viewing, if wall mounting the TV higher than eye level, the TV should be tilted downwards so 

that the TV’s screen is ‘face on’. See fi g 1 and 2 

Vi

fi g 2

TV

ewing angle

TV

Viewing angle

fi g 1

ATTACHING / DETACHING THE STAND

Attaching the Stand

Insert the stand into the bottom of the LED TV body and tighten the screws.