Baird TI4603BC User Manual - page 7
7
Important installation instructions
NOTE: For safety, you are advised to seek the assistance of a second person when installing or removing the
stand. Laying the TV fl at on a table withe bottom of the TV level with the edge makes fi tment and removal
much easier.
Detaching the Stand
1) Remove the screws highlighted
IMPORTANT - Before drilling any holes in the wall ensure you are not
drilling where there could be any electric wires, water or gas pipes.
Wall mounting the TV
This television requires a VESA STANDARD wall mount, or equivalent (The size of
the mount will vary depending upon the screen size of your TV).
1) Your TV is provided with four hexagonal spacers to attach your wall mount.
2) The wall mount can now be easily attached to the spacers using the screws provided. The positions of the
spacers is indicated in the diagram below.
Important – If wall mounting this TV, only use the spacers already provided in the wall mounting holes. Using
other screws which are longer could cause irreparable damage to internal parts.
For optimum viewing, if wall mounting the TV higher than eye level, the TV should be tilted downwards so
that the TV’s screen is ‘face on’. See fi g 1 and 2
Vi
fi g 2
TV
ewing angle
TV
Viewing angle
fi g 1
ATTACHING / DETACHING THE STAND
Attaching the Stand
Insert the stand into the bottom of the LED TV body and tighten the screws.