Baja motorsports MINI BAJA DUNE65 Assembly & Instruction Manual - page 5
Step 8
Assembly the Luggage-Carrier as follows
Insert the Lugge-Carrier end to the hole of the rear frame, add the
screw
Remove the bolt from the Luggage-carrier and keep them safe
Insert the Luggage-Carrier to the install braket add the bolt and
tighten by wrench.
Step 10
Assembly the front brush guard as show below
Insert the end of front brush guard into the front frame assembly holes and then
tighten the screw by wrench
Step 9
Now assemble the seat (7) as follows
First remove the cover and all 4 screws and nuts
Then position the seat on the frame mounting place
Then assemble the screws from top and nuts with washer from bottom
Tighten fully with screw driver and wrench all 4 screws
Then assemble cover for seat and tighten the less provided on front