Bak thermoplastic welding technology ag operating manual.
Bak thermoplastic welding technology ag 2 safety danger to life when opening the device as live components and connec- tions are exposed. Unplug the device before opening it. Danger of fire and explosion if the device is used incorrectly. Demon- strate the necessary caution when using the welding ma...
Bak thermoplastic welding technology ag 3 warranty and liabilty warranty and liability apply from the date of purchase (documented by the in- voice/delivery note) according to the currently valid general terms of business of bak. Bak refuses to honour any warranty for devices which are not in their ...
Bak thermoplastic welding technology ag 4 welding pressure: the welding pressure is stepless adjustable and transmitted via a toggle lever to the pressure rollers. The equalisation of the pressure to both welded sections as well as on a welded seam without test channel is guaranteed by the swivel he...
Bak thermoplastic welding technology ag 5 welding speed set the welding speed by the potentiometer on the front panel. The motor can be switched on and off by the switch near the potentiometer. Welding pressure engage and position the welding machine onto the material to be welded. Pull the toggle l...
Bak thermoplastic welding technology ag 6 welding procedure adjust the welding parameters (see page no. 4) wait until the hot air tool has reached the adjusted temperature. Guide and position the welding machine onto the overlapped geomembrane liner or film. Switch on the drive motor with the rocker...
Bak thermoplastic welding technology ag 7 warning if the power supply cable gets damaged, it has to be replaced by the manu- facturer, its customer service or by a qualified person in order to avoid dan- ger. The machine must not be used by personnel (including children) with lim- ited physical, sen...
Bak thermoplastic welding technology ag 8 safety symbols and standards existing risks are pointed out with the following warning symbols: risk of crushing risk of burns the operator is responsible for the compliance with safety related standards. Before the machine is commissioned, the operating per...
Bak thermoplastic welding technology ag 9 assistance and support the bak group and its authorised service centres offer free support and assis- tance in the area of applications technology. Our specialists will be pleased to help you. Customer service and orders: bak thermoplastic welding technology...
Bak thermoplastic welding technology ag 10 transport – handling – storage transport: the welding machine is packed appropriately and must be protected from mois- ture. We recommend the usage of the suitable tool box. Handling: the shipment must be checked if complete and for transport damage. In the...
Bak thermoplastic welding technology ag 11 ce/proton d eg – konformitätserklärung f déclaration ce de conformité i dichiarazione ce di conformità gb ec declaration of conformity e declaratión ce de conformidad d eg – konformitätserklärung bak thermoplastic welding technology, ch-6056 kägiswil/schwei...
Bak thermoplastic welding technology ag 12.
