BAK proton Operating Manual - page 3
BAK Thermoplastic Welding Technology AG
3
WARRANTY AND LIABILTY
Warranty and liability apply from the date of purchase (documented by the in-
voice/delivery note) according to the currently valid general terms of business of
BAK. BAK refuses to honour any warranty for devices which are not in their
original condition. BAK devices may never be reconfigured and/or modified.
BAK reserves the right to deny any responsibility if this is ignored. No liability
can be assumed by BAK for incorrect installation and/or use as well as natural
wear and tear of components (e.g. heating elements).
Note:
This operating manual must be available to the installation and operating person-
nel at all times. Read these operating instructions carefully before installing and
using the device.
Copyright:
This document must not be disclosed to third parties without the explicit written
approval of BAK. Any forms of reproduction or copying and electronic storage
are prohibited.
ITENDED USE
The ProtOn is a combined hot air- and wedge welding machine for overlap weld-
ing and prefabrication of membranes for tunnel- and civil engineering applica-
tions.
Overlap
max. 125mm
Type of seam
Welding seams are produced in accordance with DVS
2225 and BAM. Other dimensions of seams are
possible on request.
DESCRIPTION OF FUNCTIONS
Heating system:
The hot air temperature is stepless adjustable and electronically controlled. Heat
transmission by combination of all advantages of contact- and hot air welding.
The flexible combined wedge nozzle has 3 heating areas.