Bakers Pride E300 Installation & Operation Manual

Summary of E300

  • Page 1

    Installation & operation manual bakers pride ® e300 speed oven.

  • Page 2: Bakers Pride

    Installation and operating instructions bakers pride ® e300 speed oven intended for other than household use retain this manual for future reference oven must be kept clear of combustibles at all times warning: improper installation, adjustment, alteration, service or maintenance can cause property ...

  • Page 3: Table of Contents

    Table of contents safety information microwave exposure precautions 4 general safety information 5 general safety information - french 6 installation information receiving 7 set up 7 minimum clearances 8 electrical connections 8 cleaning and maintenance catalytic converter 9 cook rack and jetplates ...

  • Page 4: Safety Information

    4 for your safety: not for built-in installation. For use only in professionally staffed commercial kitchens. Not for use in areas accessible to the general public. For your safety: do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance. Warn...

  • Page 5: Safety Information

    5 safety information • read all instructions before using the appliance • read and follow the specific precautions to avoid possible exposure to excessive microwave energy located on page 4 of this manual. • this appliance must be grounded. Connect only to a properly grounded outlet. See grounding i...

  • Page 6

    6 consignes de sécurité importantes lors de l'utilisation d'appareils électriques précautions de sécurité de base doivent être respectées, y compris ce qui suit: avertissement - pour réduire les risques de brûlure, électrocution, d'incendie, de blessure ou d'exposition à l'énergie micro-ondes excess...

  • Page 7: Installation Information

    7 receiving read the notice on the outside carton regarding damage in transit. Damage discovered after opening the carton is “concealed damage.” carrier must be notified immediately to send an inspector and to furnish forms for claims against the carrier. When the oven arrives, it should consist of:...

  • Page 8: Installation Information

    8 caution: do not set the oven with its back flat against the wall. It will not operate properly unless there is at least two inches breathing space behind the oven. Electrical connection install according to the spacing requirements listed in the installation section of this manual. We strongly rec...

  • Page 9: Cleaning and Maintenance

    9 cleaning and maintenance warning: unit is not waterproof. To avoid electrical shock or personal injury, do not submerge in water. Do not operate if it has been submerged in water. Do not clean the unit with a water jet. Do not steam clean or use excessive water on the unit. Caution: use mild deter...

  • Page 10: Cleaning and Maintenance

    10 cleaning and maintenance oven cavity with the door open, the rack and jet plate(s) removed, wipe out inside of the oven with a clean, damp cloth. Use a nylon scouring pad dampened with approved cleaning chemical or stiff nylon brush to remove any baked on debris. Use a clean towel dampened with c...

  • Page 11: Oven Programming

    11 oven programming home screen • this screen will turn the oven power on. Turning the oven power off from subsequent screens will return to this screen. • this screen displays the manufactured date, serial number of the unit and the current software versions installed. • after pressing the on icon ...

  • Page 12: Oven Programming

    12 cook item screen • after choosing the group, the items are displayed. • press the arrow buttons if more than 8 items are programmed in that particular group. • place the product in the oven and select the corresponding icon to start a cook cycle. • press back to return to the group screen. Oven p...

  • Page 13: Oven Programming

    13 oven programming menu set up • selecting the menu setup tab allows the operator access to group and item menu editing. • in this example, the operator is selecting the tab from the home screen, but it can be selected from any screen that presents the operator with tabs. Home on screen (menu setup...

  • Page 14: Oven Programming

    14 oven programming menu setup item screen • selecting a group from the group edit screen will display the item edit screen shown above. • the “add new” button is available in the upper left corner to create additional recipes. • a maximum of 24 items in memory are possible for every group. • scroll...

  • Page 15: Oven Programming

    15 oven programming system set up system setup screen • full access to the system setup screen must be done with the oven in the off state. With the oven in the on state, multiple functions are not available. Press the green icon in the lower right corner return to off. • if the oven cavity temperat...

  • Page 16: Oven Programming

    16 oven statistics screen • operation is logged by days, hours and minutes for magnetron, heaters, blower and overall on time. • door cycles and cook cycles are also counted. • these numbers can be reset by pressing the reset button. A prompt will appear asking for confirmation before resetting. • s...

  • Page 17

    17 e300 speed oven wiring diagram displa y & gui bo ard speaker ca t 5 us b ca t 5 ct co il hea ter and fa n wires 17, 19, & 45 ct co il ma gnetron wires 15 & 1 6 left m ag right m ag hea ter 2 hea ter 1 stirrers cooling f ans ma gnetron fa n 24 v ac in p22 j3 sp are - sp are + red - yel lo w + canb...

  • Page 18

    18 19 1 2 3 8 12 13 10 18 9 17 10 15 16 12 13 14 23 19 20 21 4 24 25 22 27 26 28 30 29 31 32 33 7 5 6 34 11.

  • Page 19

    19 35 41 42 43 44 45 46 47 36 37 38 39 40 50 48 51 49 52 53 54.

  • Page 20

    20 item e300 part number description 1 21926252 top cover 2 21926254 left side panel 3 21926109 display panel 4 21926253 right side panel 5 21926251 back panel 6 3100733 finger guard 7 98325020 cordset, molded,10-3, nema 6-30p 8 1400044 display cover 9 21926920 door assembly 10 8606900 hinge assembl...

  • Page 21

    21 what is covered? This warranty covers defects in material and workmanship under normal use, and applies only to the original purchaser providing that: the equipment has not been accidentally or intentionally damaged, altered or misused. The equipment is properly installed, adjusted, operated and ...

  • Page 22

    22 exceptions all removable parts in bakers pride ® char broilers, including but not limited to: burners, grates, radiants, stones and valves are covered for a period of six months. All ceramic baking decks are covered for a period of three months. The installation of these replacement decks is the ...

  • Page 23

    23 notes _____________________________________________________________________________ _____________________________________________________________________________ _____________________________________________________________________________ _________________________________________________________...

  • Page 24

    1307 n. Watters road suite 180, allen, tx 75013 western@standexcsg.Com central@standexcsg.Com eastern@standexcsg.Com 800.431.2745 972.908.6100 www.Bpspeedoven.Com www.Bakerspride.Com.