Balanced Audio Technology VK-200 Owner's Manual

Summary of VK-200

  • Page 1

    Vk-200 warranty registration form unit serial number: _______________________________________ customer name: _______________________________________ address: _______________________________________ _______________________________________ date of purchase: _______________________________________ purc...

  • Page 2: Vk-200

    Vk-200 balanced power amplifier owner's manual 1300 first state blvd. Suite a w ilmington, de 19804 tel: 302-999-8855 fax: 302-999-8818.

  • Page 3

    Introduction thank you for your purchase of the balanced audio technology vk-200 balanced power amplifier. Please read this owner's manual to obtain the full benefit of the vk-200 in your system. It will provide you with the needed safety information and operating procedures for this exceptional uni...

  • Page 4

    Physical placement it is recommended that you provide for at least 6" of free space around the unit for proper ventilation. Mount the unit on a hard surface with proper ventilation underneath. Do not stack the vk-200 power amplifier on top of other units, nor vice versa. Important notes : to assure ...

  • Page 5

    Input connections best results will be obtained when connecting the vk-200 to a balanced preamplifier. However, the vk-200 is designed to accept either balanced or single-ended inputs. Balanced components use balanced xlr interconnects to connect the vk-200 to balanced preamplifier. Input connectors...

  • Page 6

    Operating the vk-200 turning the vk-200 on: the power switch is located on the vk-200 front panel. If vk-200 was turned off even for a short period of time, you should wait at least 30 seconds before turning it back on. This precaution will minimize the stress on internal components. When you turn t...

  • Page 7

    Fuse ratings the proper ratings for the main line fuse are as follows: for 100-120 vac units: 10a 250v slow blow for 200-240 vac units: 7a 250v slow blow the internal printed circuit board mounted fuses are 10a fast acting type. Factory supplied fuses should be only replaced with the same type and r...

  • Page 8

    Five year limited warranty terms and conditions 1. Limited warranty upon receipt of the attached warranty registration form, balanced audio technology warrants the purchased product to be free from manufacturing, materials, and workmanship defects for five years from date of original purchase, excep...